Overview
This OEM genuine ZF 0730.006.693 WASHER is a precision-engineered component designed to maintain critical axial clearance and load distribution within heavy-duty construction machinery transmissions. Positioned between rotating assemblies and stationary housings, this washer prevents metal-to-metal contact and ensures consistent oil film thickness under high torque conditions. The SKU 0730.006.693 is a factory-specified replacement part that directly supports the differential and axle assemblies, working in concert with the 5838109012: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING to distribute radial and axial loads evenly. Without this washer, gear mesh alignment degrades rapidly, leading to premature wear of adjacent components.
Symptoms of Failure
- Transmission oil leaks around the differential housing: A worn 0730.006.693 washer allows excessive axial play, breaking the seal between the 5838300626: DIFFERENTIAL HOUSING and the output shaft, causing fluid seepage.
- Gear slipping under load in construction equipment: When the washer thickness degrades, the 2093209023: DIFFERENTIAL loses proper preload, resulting in intermittent torque transfer and audible clunking during acceleration.
- Increased backlash and driveline vibration: A collapsed washer permits lateral movement of the bevel gear set, creating a rhythmic shudder that worsens at higher RPMs.
- Metallic debris in transmission fluid: As the washer surface erodes, fine steel particles contaminate the oil, accelerating wear on the taper roller bearing and adjacent thrust washers.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.006.693 |
| Material | Case-hardened steel (DIN 1.7131) |
| Outer Diameter | 72.0 mm |
| Inner Diameter | 58.5 mm |
| Thickness | 2.5 mm |
| Weight | 0.045 kg |
| OEM Reference | ZF 0730.006.693 |
| Hardness | 58-62 HRC |
Compatibility
This washer is a standard fitment in ZF WG180, WG200, and WG250 series transmissions commonly used in wheel loaders, excavators, and telehandlers. It is also found in ZF Ecolife and PowerShift models where the differential assembly requires precise axial shimming. Always verify the part number against your transmission’s parts manual before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for planetary drives |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures washer alignment |
| 5838300811 | THRUST WASHER | Controls axial end play |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheels |
| 5838300633 | AXLE | Connects differential to wheel hub |
| 5838300753 | THRUST WASHER | Reduces friction on gear faces |
| 5838300818 | THRUST WASHER | Compensates for thermal expansion |
Frequently Asked Questions
Q: Can I reuse the old 0730.006.693 washer during a rebuild?
A: No. This washer is a single-use crush-type component. Reusing it will not restore proper preload and will lead to rapid differential bearing failure.
Q: Does this washer fit ZF WG180 transmissions with serial numbers after 2015?
A: Yes, the 0730.006.693 is backward-compatible with all WG180, WG200, and WG250 variants. However, always measure the stack height if the differential housing has been replaced.
Q: What tools are required to replace this washer?
A: You will need a bearing puller, a torque wrench capable of 250 Nm, and a dial indicator to verify end play after installation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
