Overview
The ZF 0730.007.694 WASHER is a precision-engineered OEM genuine component designed to maintain critical axial clearance and load distribution within heavy-duty construction machinery transmissions. Positioned between rotating shafts and stationary housings, this washer prevents metal-on-metal contact and ensures proper oil film retention. As an original ZF part, SKU 0730.007.694 guarantees exact fitment and material hardness, directly supporting the durability of adjacent drivetrain components such as the 5838109012: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING.
Symptoms of Failure
- Transmission oil seepage at shaft seals: A worn 0730.007.694 washer allows excessive axial play, distorting seal lips and causing slow leaks around output flanges.
- Gear engagement noise under load: When the washer loses its original thickness, gear teeth clash during acceleration, producing a distinct “whining” or “grinding” sound in forward gears.
- Premature bearing overheating: Insufficient washer support forces the 2093209023: DIFFERENTIAL to carry uneven loads, generating localized heat that discolors nearby components.
- Vibration during low-speed maneuvers: A collapsed washer creates backlash in the differential housing, causing noticeable shudder when turning in construction site conditions.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 0730.007.694 |
| Material | Hardened carbon steel (C45E, surface nitrided) |
| Outer Diameter | 68.0 mm |
| Inner Diameter | 42.0 mm |
| Thickness | 2.5 mm |
| Weight | 0.045 kg |
| OEM Reference | ZF 0730.007.694 |
| Hardness | HRC 45-50 |
Compatibility
This washer is a standard fitment in ZF WG180, WG200, and WG211 series transmissions commonly used in wheel loaders, telehandlers, and excavators. It also appears in certain ZF 4WG-200 and 4WG-310 power shift models. Always verify clearance with the 5838300626: DIFFERENTIAL HOUSING before installation, as housing wear can alter required washer thickness.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gears |
| 0631329088 | SPRING PIN | Secures shaft alignment |
| 5838300811 | THRUST WASHER | Controls axial end play |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 5838300633 | AXLE | Rotational shaft component |
| 5838300753 | THRUST WASHER | Reduces friction on gear faces |
| 5838300818 | THRUST WASHER | Supplementary axial clearance shim |
Frequently Asked Questions
Q: Can I reuse the 0730.007.694 washer during a transmission rebuild?
A: No. ZF specifies that this washer must be replaced with a new OEM part during any differential or bearing service. Reusing it risks axial clearance deviation and accelerated wear of the 0750117075: TAPER ROLLER BEARING.
Q: How do I know if my ZF transmission uses this exact washer?
A: Check the transmission model plate for WG180, WG200, or 4WG-200 series. The washer is typically installed between the differential housing and the 2093209023: DIFFERENTIAL on the output side.
Q: What torque specification applies to the retaining bolt near this washer?
A: For the differential housing cover bolts adjacent to this washer, ZF recommends 120 Nm ±10 Nm. Always consult your service manual for the specific model.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
