Overview
The ZF 0730.007.758 SHIM is a precision-engineered adjustment component used within the differential assembly of heavy-duty construction machinery transmissions. This OEM genuine part, identified by SKU 0730.007.758, is critical for setting the correct preload and backlash between gear sets. It sits directly between the differential housing and the bearing races, ensuring that the 5838109012: DIFFERENTIAL maintains optimal alignment under extreme torque loads. Without the correct shim thickness, gear mesh patterns become erratic, leading to premature wear across the entire drivetrain.
Symptoms of Failure
- Excessive differential gear noise (whining or howling): When the shim wears or compresses beyond tolerance, gear backlash increases, causing audible distress during acceleration or deceleration.
- Premature bearing failure: A collapsed shim allows the 0750117075: TAPER ROLLER BEARING to shift, creating uneven load distribution and rapid spalling.
- Oil contamination from metal debris: Worn shim material flakes into the transmission fluid, often visible as glitter in the oil filter or drain plug.
- Vibration through the chassis: Loose gear mesh caused by a degraded shim transmits harmonic vibrations into the axle housing and operator cab.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.007.758 |
| Material | Hardened spring steel (C67S) |
| Thickness | 0.75 mm |
| Outer Diameter | 58.0 mm |
| Inner Diameter | 32.5 mm |
| Weight | 0.012 kg |
| OEM Reference | ZF 0730.007.758 |
| Surface Finish | Ground, deburred edges |
Compatibility
This shim is specifically designed for ZF heavy-duty powershift transmissions used in construction machinery. It is a direct fit for the WG180, WG200, and WG210 series. The part also appears in the differential carrier assemblies of the 4WG-200 and 5WG-200 models. When rebuilding a differential, this shim is often replaced alongside the 2093209023: DIFFERENTIAL and the 5838300626: DIFFERENTIAL HOUSING to restore factory tolerances.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports differential carrier rotation |
| 2093209023 | DIFFERENTIAL | Alternate differential assembly variant |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures shift fork or actuator linkage |
| 5838300811 | THRUST WASHER | Controls axial clearance in gear stack |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 5838300633 | AXLE | Drives final wheel reduction |
| 5838300753 | THRUST WASHER | Reduces friction on planetary gears |
| 5838300818 | THRUST WASHER | Provides axial support for sun gear |
Frequently Asked Questions
Q: Can I reuse the old shim during a differential rebuild?
A: No. ZF shims are single-use components. The 0730.007.758 compresses during initial torque application and must be replaced to maintain precise gear preload.
Q: How do I verify the correct shim thickness?
A: Measure the gear backlash with a dial indicator after installing the differential. If backlash exceeds 0.20 mm, select a thicker shim. The 0730.007.758 is a standard 0.75 mm starting point.
Q: Is this shim compatible with aftermarket differential housings?
A: It is designed for OEM ZF housings. Aftermarket housings often require custom shim stacks. Always compare the inner diameter to your housing bore before installation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
