ZF 0730.008.721 WASHER | OEM Genuine Part

Genuine ZF WASHER (Part No. 0730.008.721). Found in: Main Clutch. Also referenced as: 0730008721 / 0730.008.721 / 0730 008 721.

Overview

The ZF 0730.008.721 WASHER is an OEM genuine precision shim engineered for critical load distribution within heavy-duty construction machinery transmissions. This hardened steel component sits between the planetary gear set and the 2094101014: TRANSMISSION HOUSING, ensuring correct axial clearance and preventing metal-on-metal contact under high torque conditions. As a factory-specified spacer, the SKU 0730.008.721 maintains the exacting tolerances required for ZF power-shift transmissions, directly influencing gear alignment and hydraulic pressure stability. Without this washer, the entire rotating assembly risks excessive end-play, leading to premature wear of adjacent bearings and seals.

Symptoms of Failure

  • Transmission oil leaks at housing joint — A worn 0730.008.721 washer allows the gear stack to shift, distorting the 2094301046: HOUSING seal surface, causing fluid seepage around the PTO cover.
  • Gear slipping under load in construction equipment — When the washer thickness degrades, clutch pack clearance increases, resulting in delayed engagement and power loss during excavation or grading operations.
  • Metallic grinding noise from transmission sump — A collapsed washer permits the sun gear to contact the 2094298053: HOUSING, producing audible chatter and fine metal particles in the oil filter.
  • Hard shifting between forward and reverse — Incorrect axial play from a failed washer disrupts the 0630361034: SEALING CAP alignment, causing erratic hydraulic modulation in the valve body.

Technical Specifications

Parameter Value
Part Number (SKU) 0730.008.721
Material Hardened Spring Steel (C67S)
Outer Diameter 72.0 mm
Inner Diameter 38.5 mm
Thickness 2.5 mm
Surface Hardness HRC 45-50
Weight 0.045 kg
OEM Reference ZF 0730.008.721
Country of Origin Germany

Compatibility

This washer is integral to ZF WG-series powershift transmissions commonly found in wheel loaders, graders, and telehandlers. It directly fits the following models: WG180, WG200, WG210, and WG310. The 0730.008.721 is also used in certain ErgoPower and Ecolife variants where planetary gear preload is critical. Always verify the washer thickness against your service manual, as using an incorrect shim can damage the 2094101014: TRANSMISSION HOUSING bore.

Related Components

Part Number Name Function
2094101014 TRANSMISSION HOUSING Main structural casing for gear train
2094301046 HOUSING Intermediate housing for clutch pack
2094298053 HOUSING Rear housing supporting output shaft
0630361034 SEALING CAP Prevents oil bypass at housing bore
2094301071 COVER Closes access port for valve body
2094301030 GASKET Seals housing-to-cover interface
0750111371 SHAFT SEAL Dynamic seal for rotating shaft
0634303085 O-RING Static seal for hydraulic passages
0631306670 CYLINDRICAL PIN Aligns housing halves during assembly
0636011356 HEXAGON SCREW Fastens housing to transmission case
Section

Main Clutch

Part Type (CN)

Washer

WA WhatsApp