ZF 0730.008.791 SHIM | OEM Genuine Part

Overview

The ZF 0730.008.791 SHIM is a precision-engineered OEM genuine part designed to establish critical axial clearances within ZF heavy-duty transmissions used in construction machinery. This thin, hardened steel shim sits between the transmission housing and bearing assemblies, compensating for manufacturing tolerances and ensuring correct gear mesh preload. The SKU 0730.008.791 is specifically calibrated to maintain oil film thickness and prevent metal-to-metal contact under high torque loads. Without this shim, the entire rotating assembly can shift out of alignment, leading to accelerated wear on adjacent components such as the 2094101012: TRANSMISSION HOUSING and the 2094301036: HOUSING.

Symptoms of Failure

When the ZF 0730.008.791 shim wears or is omitted during rebuild, operators typically notice these specific failure modes:

• Transmission oil leaks at housing joints – A worn shim allows the 2094298057: HOUSING to shift, breaking the seal face and causing external fluid seepage.
• Gear slipping under load – Incorrect shim thickness reduces clutch pack clamping force, leading to intermittent power loss during excavation or grading.
• Abnormal bearing noise (whining or rumbling) – Excessive axial play from a collapsed shim forces bearings to operate outside their designed preload range, generating audible distress.
• Premature failure of the 2094301071: COVER seal – Misalignment caused by shim degradation puts uneven pressure on the cover gasket, causing recurrent leaks.

Technical Specifications

Compatibility

This shim is primarily used in ZF WG series powershift transmissions common in wheel loaders, dozers, and graders. Compatible models include:

• ZF WG180
• ZF WG200
• ZF WG310
• ZF 4WG-200
• ZF 6WG-310

Always verify shim thickness against the service manual for your specific transmission serial number, as selective shims are matched to bearing preload during assembly.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.008.791 shim used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This OEM shim sets the correct axial clearance between bearings and the transmission housing in ZF WG series transmissions, preventing gear misalignment and oil leaks.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the 0730.008.791 shim during a rebuild?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. Shims are single-use components that compress and conform during initial assembly. Always replace with a new OEM shim to maintain proper preload and avoid premature bearing failure.”
}
},
{
“@type”: “Question”,
“name”: “Which ZF models use part 0730.008.791?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This shim is compatible with ZF WG180, WG200, WG310, 4WG-200, and 6WG-310 transmissions commonly found in construction machinery like wheel loaders and graders.”
}
}
]
}