ZF 0730.008.967 SHIM | OEM Genuine Part

Overview

The ZF 0730.008.967 SHIM is a precision-engineered OEM genuine part designed for critical axial clearance adjustment within ZF heavy-duty transmission assemblies. This thin, hardened steel shim sits between the transmission housing and bearing races or gear faces to eliminate unwanted end-play and maintain correct gear mesh depth. The SKU 0730.008.967 is specifically utilized in construction machinery transmissions, where vibration and thermal expansion demand exacting tolerances. By compensating for manufacturing tolerances and wear, this shim ensures that rotating components remain properly aligned, preventing premature bearing failure and drivetrain noise. It is frequently installed during rebuilds alongside the 2094101012: TRANSMISSION HOUSING and the 2094301036: HOUSING to restore factory-specified clearances.

Symptoms of Failure

• Excessive axial play in the output shaft: When the shim compresses or wears unevenly, you will detect noticeable back-and-forth movement in the driveline, often described as “end float.” This is a common long-tail search query for “ZF transmission output shaft play repair.”
• Gear engagement difficulty under load: A worn 0730.008.967 shim allows the gear cluster to shift axially, causing incomplete engagement of dog clutches. Operators report grinding noises when shifting into forward or reverse, particularly in WG-series transmissions.
• Low-frequency vibration at specific RPM ranges: As the shim loses its precise thickness, bearing preload is lost, leading to harmonic vibrations that resonate through the 2094298057: HOUSING. This symptom is frequently searched as “ZF transmission vibration after rebuild.”
• Oil contamination from metal particles: A collapsed or fractured shim generates fine metallic debris that circulates through the hydraulic system, accelerating wear on the 2094301071: COVER and valve bodies.

Technical Specifications

Compatibility

This shim is a direct-fit component for the following ZF transmission models commonly found in construction machinery such as wheel loaders, graders, and telehandlers:

• ZF WG180 (all series)
• ZF WG200 (all series)
• ZF WG210 (early production)
• ZF 4WG-200 / 4WG-210
• ZF Ergopower 3 (select variants)

Always verify the stack height requirement during assembly. For complete transmission rebuilds, pair this shim with a new 0750111371: SHAFT SEAL and 0634303085: O-RING to prevent fluid bypass.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.008.967 shim used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This shim is used to adjust axial clearance between the transmission housing and rotating gear assemblies in ZF WG180, WG200, and WG210 construction machinery transmissions. It prevents end-play and ensures proper bearing preload.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if the 0730.008.967 shim needs replacement?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common symptoms include excessive output shaft end-play, gear grinding during shifts, low-frequency vibration, and metal particles in the transmission oil. Always measure the stack height and replace the shim if it shows compression marks or deformation.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the 0730.008.967 shim during a rebuild?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “ZF recommends replacing all shims during a major rebuild because they work-harden and can lose their precise thickness. Reusing a worn shim may lead to incorrect gear mesh and premature bearing failure.”
}
}
]
}