ZF 0730.104.385 WASHER | OEM Genuine Part

Genuine ZF WASHER (Part No. 0730.104.385). Found in: Main Clutch. Also referenced as: 0730104385 / 0730.104.385 / 0730 104 385.

Overview

The ZF 0730.104.385 WASHER is a precision-engineered OEM genuine component designed to maintain critical axial clearance and load distribution within heavy-duty construction machinery transmissions. This hardened steel washer sits between rotating shafts and stationary housings, preventing metal-on-metal contact that leads to premature wear. Specifically, it functions as a thrust washer within the planetary gear set assembly, ensuring smooth torque transfer under extreme loads. The SKU 0730.104.385 is manufactured to ZF’s exacting tolerances, guaranteeing a perfect fit when paired with the TRANSMISSION HOUSING and HOUSING components. Without this washer, gear alignment shifts, leading to accelerated component fatigue and eventual transmission failure.

Symptoms of Failure

  • Transmission oil leaks near the shaft seal area — A worn 0730.104.385 washer allows axial play that compromises the SEALING CAP, causing fluid to escape past the seal lip.
  • Gear slipping under load during excavation — Excessive clearance from a flattened washer reduces clutch pack clamping force, resulting in power loss when digging or lifting.
  • Metallic grinding noise from the transmission housing — As the washer wears to below minimum thickness, rotating gears contact the HOUSING, producing a distinct high-pitched scraping sound.
  • Increased vibration at the driveline — Uneven washer wear creates eccentric loading, causing rhythmic shaking that worsens during acceleration.

Technical Specifications

Specification Value
Part Number 0730.104.385
Material Hardened Carbon Steel (C45E + QT)
Inner Diameter 38.0 mm
Outer Diameter 55.0 mm
Thickness 2.5 mm
Weight 0.018 kg
Surface Hardness HRC 45-50
OEM Reference ZF 0730.104.385

Compatibility

This washer is engineered for ZF heavy-duty transmissions commonly used in construction machinery, including the WG180, WG200, WG210, and WG240 series. It is also found in select off-highway models like the 4WG-180 and 5WG-200. The 0730.104.385 is installed in the planetary carrier assembly, where it interfaces directly with the HOUSING and HOUSING components. Always verify your transmission model’s parts catalog before ordering, as variations exist between early and late production units.

Related Components

Part Number Name Function
2094101014 TRANSMISSION HOUSING Main structural casing for gear train
2094301046 HOUSING Intermediate support housing for shafts
2094298053 HOUSING Rear planetary carrier housing
0630361034 SEALING CAP Prevents fluid ingress at shaft exit
2094301071 COVER Access cover for clutch pack inspection
2094301030 GASKET Seals housing-to-cover interface
0750111371 SHAFT SEAL Dynamic seal for rotating shafts
0634303085 O-RING Static seal for hydraulic passages
0631306670 CYLINDRICAL PIN Alignment pin for housing assembly
0636011356 HEXAGON SCREW Fastener for housing attachment
Section

Main Clutch

Part Type (CN)

Washer

WA WhatsApp