Overview
The ZF 0730.106.141 WASHER is a precision-engineered OEM genuine component designed to maintain critical axial clearances within heavy-duty construction machinery transmissions. This hardened steel washer sits between rotating gear sets and housing surfaces, preventing metal-on-metal contact while ensuring proper load distribution. As part of the differential assembly, the SKU 0730.106.141 works in concert with the 5838109012: DIFFERENTIAL to stabilize gear mesh patterns and reduce vibrational wear. Its precise thickness tolerances directly influence the preload on the 0750117075: TAPER ROLLER BEARING, making it a critical shim component for transmission longevity.
Symptoms of Failure
- Transmission oil leaks around the differential housing – A worn 0730.106.141 washer allows excessive axial play, compromising the seal between the 5838300626: DIFFERENTIAL HOUSING and output shaft.
- Intermittent gear slipping under load – Thinning of the washer reduces clamping force on the 2093209023: DIFFERENTIAL assembly, causing momentary torque loss during excavation or grading operations.
- Metallic grinding noise during turns – Insufficient washer thickness permits the bevel gear set to contact the housing, producing a distinct high-pitched scraping sound.
- Premature bearing failure – When the 0730.106.141 wears beyond 0.2mm, the taper roller bearing loses its preload, accelerating raceway spalling.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.106.141 |
| Material | Case-hardened alloy steel (SAE 8620 equivalent) |
| Outer Diameter | 68.5 mm |
| Inner Diameter | 42.0 mm |
| Thickness | 2.5 mm |
| Weight | 0.045 kg |
| Surface Hardness | 58-62 HRC |
| OEM Reference | ZF 0730.106.141 |
Compatibility
This washer is engineered for ZF WG-series powershift transmissions commonly found in wheel loaders, graders, and telehandlers. Confirmed compatible models include WG180, WG200, WG210, and WG310. It also serves as a direct replacement in ZF 4WG-200 and 6WG-310 differential carriers. Always verify the washer stack height against the 5838300811: THRUST WASHER specifications when rebuilding.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on differential shaft |
| 2093209023 | DIFFERENTIAL | Secondary differential unit for planetary axles |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures washer alignment during assembly |
| 5838300811 | THRUST WASHER | Controls axial clearance in bevel gear set |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 5838300633 | AXLE | Rotates wheel hub assembly |
| 5838300753 | THRUST WASHER | Reduces friction on axle shaft shoulder |
| 5838300818 | THRUST WASHER | Compensates for thermal expansion in differential |
Frequently Asked Questions
Q: Can I reuse the 0730.106.141 washer during a transmission rebuild?
A: No. This washer is a single-use crush-type shim. Reusing it will not restore proper preload on the taper roller bearing, leading to rapid failure of the differential assembly.
Q: How do I measure if my current washer is worn?
A: Use a micrometer to measure thickness at three points around the circumference. If any reading is below 2.3mm, or if the variation exceeds 0.05mm, immediate replacement is required.
Q: Does this washer fit ZF 4WG-200 transmissions with serial numbers after 2015?
A: Yes. The 0730.106.141 supersedes all earlier washer variants for WG200 series transmissions manufactured after 2010. Always cross-reference with your transmission’s parts manual.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
