ZF 0730.107.724 WASHER | OEM Genuine Part

Overview

The ZF 0730.107.724 WASHER is a precision-engineered OEM genuine component designed for critical load distribution within heavy-duty construction machinery transmissions. This hardened steel washer sits directly on the main shaft assembly, acting as a thrust surface between rotating gears and stationary housings. Its primary function is to maintain precise axial clearances, preventing metal-on-metal contact that would otherwise lead to rapid wear. The SKU 0730.107.724 is manufactured to ZF’s exacting tolerances, ensuring consistent clamping force when paired with the 2094104412: MAIN SHAFT and the 2094304054: MAIN SHAFT assemblies. Without this washer, the entire gear train loses its positional stability, leading to premature component fatigue.

Symptoms of Failure

• Transmission oil leaks at the shaft seal: When the 0730.107.724 washer wears thin, the main shaft develops excessive end-play, which distorts the lip seal and allows hydraulic fluid to escape. This is a common failure point in ZF WG180 and WG200 units operating under high torque loads.
• Gear engagement noise during shifting: A worn washer creates axial slack in the shift system. Operators will hear a distinct “clunk” or grinding sound when engaging forward or reverse gears, particularly under load. This symptom often accompanies a failing 2094106010: SHIFT SYSTEM.
• Erratic gear slipping under load: As the washer loses thickness, the 2094206001: GEARSHIFT SHAFT cannot maintain proper fork alignment. This causes partial gear disengagement, resulting in power loss and overheating of the transmission fluid.
• Vibration in the driveline at low speeds: A collapsed washer allows the main shaft to oscillate radially, transmitting vibration through the chassis. This is often misdiagnosed as a universal joint issue when the root cause is axial play in the transmission.

Technical Specifications

Compatibility

This washer is a standard fitment across multiple ZF heavy-duty transmission families used in construction machinery. It is directly compatible with the WG180, WG200, and WG210 series, where it serves as the primary thrust washer on the input shaft. It also appears in the 4WG-200 and 5WG-200 variants. For proper installation, always verify the washer orientation against the 2094306053: GEARSHIFT SHAFT and the 0630513070: SNAP RING that secures it in place. The 0730.107.724 is not interchangeable with the 2094306019: WASHER, which has a different inner diameter for secondary shaft applications.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.107.724 washer used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This OEM genuine washer is used as a thrust washer on the main shaft assembly in ZF WG180, WG200, and WG210 transmissions. It maintains axial clearance between rotating gears and stationary housings to prevent metal-on-metal contact.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if my ZF 0730.107.724 washer is worn out?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common symptoms include transmission oil leaks at the shaft seal, gear engagement noise during shifting, erratic gear slipping under load, and driveline vibration at low speeds. These issues typically arise from excessive axial play caused by washer wear.”
}
},
{
“@type”: “Question”,
“name”: “Can I replace the 0730.107.724 washer with a different part number?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. This washer has specific inner and outer diameters (28.5 mm and 42.0 mm) and a thickness of 2.5 mm. Using a substitute like the 2094306019 washer, which has different dimensions, will cause improper shaft clearance and transmission damage.”
}
}
]
}