Overview
The ZF 0730.108.200 SHIM is a precision-engineered OEM genuine component designed to establish critical axial clearances within heavy-duty ZF transmission assemblies. This shim sits between the differential housing and bearing races, ensuring correct preload on rotating elements. As a consumable adjustment part, the SKU 0730.108.200 directly influences gear mesh accuracy and load distribution across the drivetrain. When installed alongside a 2095109020: DIFFERENTIAL or a 2095209037: DIFFERENTIAL, this shim prevents metal-to-metal contact that accelerates wear on adjacent components.
Symptoms of Failure
- Excessive axial play in the differential assembly — When the 0730.108.200 shim compresses or fractures, operators notice a distinct clunking noise during load reversal, indicating lost preload on the 0750117075: TAPER ROLLER BEARING.
- Oil contamination from metallic debris — A worn shim sheds fine steel particles into the transmission fluid, visible during routine drain intervals as a silver sheen in the oil.
- Intermittent gear slipping under heavy load — Incorrect shim thickness allows the differential housing to shift, causing momentary disengagement of the pinion from the ring gear, particularly in WG-series transmissions.
- Vibration at specific RPM ranges — Loss of shim integrity alters the resonant frequency of the differential assembly, transmitting harmonic vibrations through the 2095309059: DIFF.HOUSING.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.108.200 |
| Material | Case-hardened steel (DIN 1.7131) |
| Thickness | 2.00 mm (nominal) |
| Outer Diameter | 108 mm |
| Inner Diameter | 73 mm |
| Weight | 0.12 kg |
| OEM Reference | ZF 0730.108.200 |
| Hardness | 58-62 HRC |
Compatibility
This shim is engineered for ZF heavy-duty powershift transmissions commonly found in construction machinery. It is a direct fit for the following ZF models: WG180, WG200, WG210, and WG250 series. The 0730.108.200 is also used in certain off-highway truck transmissions (e.g., ZF 4WG-310) where differential preload adjustment is required. Always verify the shim stack height against the service manual when replacing a 2095309059: DIFF.HOUSING or installing a new 0750117075: TAPER ROLLER BEARING.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2095109020 | DIFFERENTIAL | Distributes torque to drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on differential |
| 2095209037 | DIFFERENTIAL | Alternate differential assembly variant |
| 2095309059 | DIFF.HOUSING | Encloses differential gears and bearings |
| 0631329086 | SPRING PIN | Secures shim and gear alignment |
| 0730300820 | THRUST WASHER | Reduces friction between rotating surfaces |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2095309081 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Controls axial clearance in differential |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Engages with pinion for torque split |
