ZF 0730.108.202 SHIM | OEM Genuine Part

Genuine ZF SHIM (Part No. 0730.108.202). Found in: Rear Axle Hous., Splitter Box. Also referenced as: 0730108202 / 0730.108.202 / 0730 108 202.

Overview

The ZF 0730.108.202 SHIM is a precision-engineered OEM genuine spacer component designed to establish exact axial clearances within heavy-duty ZF transmissions. This shim sits between the differential housing and bearing races, controlling end-play and preload in the final drive assembly. By maintaining precise tolerances, the 0730.108.202 ensures optimal gear mesh patterns and load distribution across the drivetrain. As a critical adjustment element, this shim directly influences the longevity of surrounding components such as the 2095109020: DIFFERENTIAL and the 0750117075: TAPER ROLLER BEARING. The SKU 0730.108.202 is commonly referenced in construction machinery service manuals for axle rebuilds.

Symptoms of Failure

  • Excessive differential end-play causing gear whine: When the 0730.108.202 shim compresses or wears, the 2095209037: DIFFERENTIAL assembly develops lateral movement, producing a low-frequency howl during acceleration or deceleration.
  • Oil seepage at axle housing seals: Worn shim thickness alters bearing preload, allowing the 2095309059: DIFF.HOUSING to shift, which distorts seal contact surfaces and leads to lubricant leaks.
  • Intermittent driveline clunking on direction changes: Insufficient shim support causes the taper roller bearing to lose its crush fit, creating a metallic knock when shifting from forward to reverse under load.
  • Premature bearing fatigue and spalling: Incorrect shim thickness forces uneven load on the roller elements, accelerating wear on the 0750117075: TAPER ROLLER BEARING and generating debris in the oil.

Technical Specifications

Parameter Value
Part Number 0730.108.202
Material Case-hardened spring steel (DIN 1.3505)
Outer Diameter 68.0 mm
Inner Diameter 42.5 mm
Thickness 1.02 mm (nominal)
Weight 0.018 kg
Surface Finish Ground, deburred edges
OEM Reference ZF 0730.108.202
Hardness 58-62 HRC

Compatibility

This shim is engineered for ZF heavy-duty powershift transmissions commonly used in construction machinery. It is a direct fit for the following transmission models: WG180, WG200, WG210, and WG250 series. The 0730.108.202 also appears in axle assemblies paired with the 4WG-200 and 5WG-210 transfer cases. Always verify shim stack height using a dial indicator during installation to ensure proper preload on the 2095309059: DIFF.HOUSING.

Related Components

Part Number Name Function
2095109020 DIFFERENTIAL Distributes torque between axles
0750117075 TAPER ROLLER BEARING Supports rotating differential assembly
2095209037 DIFFERENTIAL Secondary torque distribution unit
2095309059 DIFF.HOUSING Encloses differential gears and bearings
0631329086 SPRING PIN Locks shim and gear alignment
0730300820 THRUST WASHER Reduces axial friction in gear sets
4482360002 AXLE BEVEL GEAR Transfers power to wheel hubs
2095309081 DIFFERENTIAL AXLE Carries differential side gears
5838300811 THRUST WASHER Controls gear end-play
4482360001 DIFFERENTIAL BEVEL GEAR Engages with axle bevel gear
Section

Rear Axle Hous., Splitter Box

WA WhatsApp