ZF 0730.108.428 WASHER | OEM Genuine Part

Overview

The ZF 0730.108.428 WASHER is a precision-engineered OEM genuine thrust washer designed to maintain critical axial clearances within the transmission’s rotating assembly. Positioned between the main shaft and the shift system components, this hardened steel washer prevents metal-to-metal contact and ensures consistent load distribution during high-torque operations. As a factory-specified part, the SKU 0730.108.428 directly replaces worn washers to restore factory tolerances in construction machinery transmissions. When paired with a 2094104412 MAIN SHAFT or a 2094106010 SHIFT SYSTEM, this washer guarantees reliable power transfer under heavy loads.

Symptoms of Failure

• Transmission oil leaks near the main shaft housing: A worn 0730.108.428 washer allows excessive axial play, breaking the seal between rotating and stationary components. Search for “ZF transmission oil leak main shaft washer” to identify this issue.
• Gear engagement hesitation or grinding: When the washer thickness degrades, the 2094206001 GEARSHIFT SHAFT loses its precise alignment, causing delayed or rough shifts. This is often reported as “ZF WG transmission hard shifting.”
• Metallic rattling from the transmission bell housing: A collapsed washer creates loose clearance between the 2094304054 MAIN SHAFT and adjacent gears, producing a distinct rattle at idle or low RPM.
• Progressive loss of power to the wheels: As the washer flattens, axial thrust loads transfer improperly, leading to clutch pack slippage and reduced torque delivery—a classic “ZF transmission slipping under load” symptom.

Technical Specifications

Compatibility

This washer is engineered for ZF WG-series powershift transmissions commonly used in construction machinery. It is a direct fit for the WG180, WG200, and WG210 models. The 0730.108.428 also appears in certain ZF 4WG-200 and ZF 5WG-180 variants. Always verify clearance when replacing alongside a 2094304054 MAIN SHAFT or 2094106010 SHIFT SYSTEM to maintain proper stack height.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.108.428 washer used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “The 0730.108.428 is a hardened thrust washer that maintains axial clearance between the main shaft and shift system components in ZF WG180, WG200, and WG210 transmissions. It prevents metal-to-metal wear and ensures proper gear alignment.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if my ZF transmission washer is failing?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common symptoms include oil leaks near the main shaft housing, hard gear engagement, metallic rattling from the bell housing, and power loss under load. These indicate the washer has worn beyond its 2.5 mm thickness tolerance.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the old washer when replacing the main shaft?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. The 0730.108.428 washer is a single-use component that compresses during initial installation. Reusing it will cause incorrect axial play, leading to premature failure of the main shaft and shift system. Always install a new OEM washer.”
}
}
]
}