Overview
This ZF 0730.108.536 WASHER is an OEM genuine shim component engineered for precise axial clearance control within heavy-duty construction machinery transmissions. Positioned between planetary gear sets and bearing races, this hardened steel washer prevents metal-to-metal contact while maintaining critical end-play tolerances. The SKU 0730.108.536 is a factory-specified replacement for maintaining original equipment performance in ZF drivetrains, particularly when paired with the 5838109012: DIFFERENTIAL assembly. Proper installation of this washer ensures the 0750117075: TAPER ROLLER BEARING maintains correct preload, directly influencing gear mesh alignment and torque transfer efficiency.
Symptoms of Failure
- Transmission oil seepage at axle housing seals – A worn 0730.108.536 washer allows excessive bearing play, distorting seal contact surfaces and causing gradual fluid loss around the 5838300626: DIFFERENTIAL HOUSING.
- Intermittent gear slipping under load – When the washer thickness degrades, axial movement in the differential carrier creates momentary disengagement of the 2093209023: DIFFERENTIAL gears, particularly during excavator swing or loader reverse cycles.
- Metallic grinding noise from transmission sump – Advanced washer wear permits the taper roller bearing to contact the housing directly, generating fine metal particles that contaminate hydraulic fluid.
- Vibration in low-gear operation – Uneven washer compression alters the preload on the differential assembly, causing driveline shudder during start-stop construction maneuvers.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 0730.108.536 |
| Material | Case-hardened alloy steel (DIN 1.7131) |
| Outer Diameter | 68.0 mm |
| Inner Diameter | 52.5 mm |
| Thickness | 2.50 mm ±0.05 mm |
| Weight | 0.045 kg |
| OEM Reference | ZF 0730.108.536 |
| Surface Hardness | 58-62 HRC |
Compatibility
This washer is dimensionally validated for ZF WG180, WG200, and WG250 series powershift transmissions used in wheel loaders, dozers, and telehandlers. It also fits select ZF Ecomat 4HP and 5HP automatic transmissions when installed as part of the differential bearing stack. Always verify clearance with the 5838300811: THRUST WASHER and 5838300721: AXLE BEVEL GEAR during rebuilds.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports differential carrier rotation |
| 2093209023 | DIFFERENTIAL | Secondary differential for limited slip |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses gear set and bearings |
| 0631329088 | SPRING PIN | Secures washer alignment in bore |
| 5838300811 | THRUST WASHER | Absorbs axial thrust loads |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 5838300633 | AXLE | Driveshaft connecting differential to wheel |
| 5838300753 | THRUST WASHER | Secondary axial load distribution |
| 5838300818 | THRUST WASHER | Adjusts differential side clearance |
Frequently Asked Questions
Q: Can I reuse the 0730.108.536 washer during a transmission rebuild?
A: No. This washer is a single-use crush component. Reusing it will result in incorrect bearing preload and premature failure of the 0750117075: TAPER ROLLER BEARING.
Q: How do I verify the correct thickness of this washer for my application?
A: Measure the axial play in the differential assembly using a dial indicator, then select the washer thickness (2.50 mm standard) that achieves 0.05-0.15 mm end-play when torqued.
Q: Does this washer fit the ZF WG180 transmission with the 5838300626: DIFFERENTIAL HOUSING?
A: Yes. The 0730.108.536 is the OEM specified shim for WG180 differential housings manufactured after 2012. Always confirm housing bore diameter before installation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
