ZF 0730.109.738 SHIM | OEM Genuine Part

Genuine ZF SHIM (Part No. 0730.109.738). Found in: Bevel Drive. Also referenced as: 0730109738 / 0730.109.738 / 0730 109 738.

Overview

The ZF 0730.109.738 SHIM is a precision-engineered spacer component used to establish correct axial clearances within heavy-duty ZF transmissions. Positioned between gear sets and bearing assemblies, this OEM genuine shim ensures that rotating elements maintain their designed end-play tolerances under load. The SKU 0730.109.738 is a factory-specified part for construction machinery transmissions, preventing metal-to-metal contact that would otherwise lead to premature wear. When installed alongside a 5838109007: DIFFERENTIAL, this shim compensates for stack-up tolerances, guaranteeing smooth power transfer through the drivetrain.

Symptoms of Failure

  • Excessive gear backlash or clunking during direction changes — A worn or collapsed shim allows the differential assembly to shift axially, producing audible impacts when engaging forward or reverse.
  • Premature bearing noise or vibration — Without proper shim thickness, a 0750117075: TAPER ROLLER BEARING loses preload, leading to tapered roller skidding and a low-frequency rumble at operating speeds.
  • Oil contamination from metallic debris — As the shim surface wears, fine steel particles circulate through the hydraulic system, often visible on the magnetic drain plug.
  • Intermittent loss of drive torque — Axial play caused by shim degradation can misalign the 2095209019: DIFFERENTIAL, causing momentary slippage under heavy load.

Technical Specifications

Parameter Specification
Part Number 0730.109.738
Material Hardened spring steel (C67S equivalent)
Thickness 1.50 mm (nominal)
Outer Diameter 82.0 mm
Inner Diameter 62.5 mm
Weight 0.028 kg
OEM Reference ZF 0730.109.738
Surface Finish Ground, deburred edges

Compatibility

This shim is designed for ZF WG series powershift transmissions commonly found in wheel loaders, graders, and telehandlers. Compatible models include the WG180, WG200, and WG210 series. It also applies to select 4WG-200 and 6WG-200 variants used in construction machinery. The 0730.109.738 shim is typically located in the differential carrier housing, where it sets the preload for the taper roller bearing pair. Always verify the shim stack thickness during rebuild; a 0631329086: SPRING PIN is often replaced concurrently to secure the differential carrier to the housing.

Related Components

Part Number Name Function
5838109007 DIFFERENTIAL Distributes torque to axle shafts
0750117075 TAPER ROLLER BEARING Supports differential carrier rotation
2095209019 DIFFERENTIAL Alternate differential assembly variant
0631329086 SPRING PIN Locks differential to housing
5838300817 THRUST WASHER Controls axial play in gear train
5838300682 DIFFERENTIAL AXLE Transmits power to wheel hubs
5838300811 THRUST WASHER Reduces friction on planetary gears
5841302064 THRUST WASHER High-load washer for output shaft
5838300137 OUTER CLUTCH DISK Steel friction plate for clutch pack
5838300138 INNER CLUTCH DISK Friction-lined disk for clutch engagement
Section

Bevel Drive

WA WhatsApp