ZF 0730.150.560 SHIM | OEM Genuine Part

Overview

The ZF 0730.150.560 SHIM is a precision-engineered OEM genuine spacer component designed for critical axial clearance adjustment within ZF heavy-duty construction machinery transmissions. This shim sits between the transmission housing and bearing assemblies to maintain exact end-play tolerances, preventing gear train misalignment under extreme loads. The SKU 0730.150.560 is specifically calibrated to compensate for manufacturing tolerances in the HOUSING and HOUSING assemblies, ensuring optimal gear mesh depth and shaft stability. Without this shim, the transmission’s internal clearances can shift, leading to premature wear on adjacent components.

Symptoms of Failure

• Transmission gear slipping under load: A worn or missing 0730.150.560 shim allows excessive axial play, causing gears to disengage during high-torque operations in excavators and loaders.
• Low-frequency bearing rumble: When the shim compresses or corrodes, bearing preload is lost, producing a distinct grinding noise from the TRANSMISSION HOUSING area during deceleration.
• Oil contamination from metal debris: Shim degradation releases fine metallic particles into the hydraulic circuit, often detected during routine oil analysis or filter inspections.
• Intermittent driveline vibration: Uneven shim wear creates radial runout, causing noticeable vibration at specific RPM ranges in WG-series transmissions.

Technical Specifications

Compatibility

This shim is engineered for ZF WG180, WG200, and WG210 series powershift transmissions commonly used in construction machinery such as wheel loaders, dozers, and graders. It also fits select ZF Ecomat 4HP and 5HP models where axial shimming of the main shaft bearing is required. Always verify the shim thickness against the service manual’s end-play specification for your specific COVER assembly configuration.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 0730.150.560 shim used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This OEM shim adjusts axial clearance between the transmission housing and bearing assemblies in ZF WG180, WG200, and WG210 transmissions, preventing gear misalignment and bearing overload.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if my ZF shim 0730.150.560 needs replacement?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common indicators include gear slipping under load, bearing rumble from the housing area, metallic debris in oil, and driveline vibration at specific RPM ranges.”
}
},
{
“@type”: “Question”,
“name”: “Can I reuse the 0730.150.560 shim during transmission rebuild?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. ZF recommends replacing this shim during any major transmission overhaul because it is a selective-fit component that can deform or wear, compromising end-play tolerances.”
}
}
]
}