Overview
The ZF 0730.301.113 WASHER is a precision-engineered OEM genuine component designed to maintain critical axial clearances within heavy-duty construction machinery transmissions. This hardened steel washer sits between planetary gear sets and the differential housing, ensuring proper load distribution and preventing metal-on-metal contact during high-torque operations. As part number 0730.301.113, it functions as a sacrificial wear surface that protects more expensive transmission components from premature failure. In ZF drivetrains, this washer is typically installed adjacent to the 5838109012: DIFFERENTIAL and works in concert with the 0750117075: TAPER ROLLER BEARING to maintain precise gear mesh alignment.
Symptoms of Failure
- Transmission oil leaks at axle housing seals: When the 0730.301.113 washer wears beyond tolerance, increased axial play forces lubricant past seals, causing visible drips around the differential area.
- Intermittent gear slipping under load: A worn washer allows the 2093209023: DIFFERENTIAL to shift position, resulting in momentary loss of power transfer during excavation or grading operations.
- Metallic grinding noise from transmission center section: Thinned washers permit contact between rotating gears and the 5838300626: DIFFERENTIAL HOUSING, producing a distinct grinding sound that worsens with load.
- Increased backlash in driveline: Operators may notice excessive free play when shifting between forward and reverse, indicating the washer can no longer maintain proper gear spacing.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.301.113 |
| Material | Hardened carbon steel (HRC 58-62) |
| Outer Diameter | 72.0 mm |
| Inner Diameter | 48.5 mm |
| Thickness | 2.5 mm |
| Weight | 0.045 kg |
| OEM Reference | ZF 0730.301.113 |
| Surface Finish | Ground, phosphate coated |
Compatibility
This genuine ZF washer is engineered for use in the following transmission models commonly found in construction machinery: ZF WG180, ZF WG200, ZF WG210, and ZF 4WG-200 series. It is also compatible with certain ZF 6WG-200 and ZF 6WG-250 transmissions used in wheel loaders, graders, and dump trucks. Always verify fitment by cross-referencing your transmission serial number with the 0730.301.113 specification.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on differential |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses and supports differential gears |
| 0631329088 | SPRING PIN | Secures washer and gear alignment |
| 5838300811 | THRUST WASHER | Controls axial clearance in gear sets |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 5838300633 | AXLE | Rotates to drive wheels |
| 5838300753 | THRUST WASHER | Reduces friction on planetary gears |
| 5838300818 | THRUST WASHER | Provides wear surface for differential side gears |
Frequently Asked Questions
Q: How often should the ZF 0730.301.113 washer be replaced?
A: This washer should be inspected during every major transmission overhaul (typically every 4,000-6,000 operating hours in construction machinery). Replacement is recommended if thickness measures below 2.2 mm or if surface scoring is visible.
Q: Can I reuse the old washer if it looks clean?
A: No. Even visually intact washers may have work-hardened or developed micro-cracks. Always install a new OEM 0730.301.113 washer to maintain proper preload on the taper roller bearing and differential assembly.
Q: Will a worn washer cause damage to other transmission parts?
A: Yes. A failed washer allows excessive movement that can damage the differential housing, taper roller bearings, and axle bevel gears. Prompt replacement prevents costly collateral damage to the entire drivetrain.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
