Overview
The ZF 0730.301.114 WASHER is an OEM genuine shim component engineered for precise axial clearance control within heavy-duty construction machinery transmissions. This hardened steel washer sits between the differential housing and the bevel gear set, maintaining critical end-play tolerances that prevent gear train misalignment. As a factory-specification part, the SKU 0730.301.114 ensures exact thickness and surface flatness required for long-term durability in ZF power divider assemblies. When installed alongside the 5838300626: DIFFERENTIAL HOUSING, this washer stabilizes the rotating assembly under high torque loads common in wheel loaders and graders.
Symptoms of Failure
- Transmission oil seepage at axle flange: A worn 0730.301.114 washer allows excessive differential housing movement, breaking the seal between the 5838109012: DIFFERENTIAL and housing, leading to visible oil drips after operation.
- Intermittent gear whine during turns: Reduced washer thickness causes the 2093209023: DIFFERENTIAL to contact the housing under load, producing a cyclical metallic noise that intensifies with steering angle.
- Premature bearing failure in final drive: Incorrect axial play from a collapsed washer overloads the 0750117075: TAPER ROLLER BEARING, causing rough rotation and increased operating temperatures.
- Vibration in low-gear operation: A deformed washer creates uneven preload on the differential carrier, transmitting vibration through the chassis during loading cycles.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0730.301.114 |
| Material | Hardened alloy steel (DIN 1.3505 equivalent) |
| Outer Diameter | 68.0 mm |
| Inner Diameter | 42.5 mm |
| Thickness | 2.50 mm |
| Surface Hardness | HRC 58-62 |
| Weight | 0.045 kg |
| OEM Reference | ZF 0730.301.114 |
Compatibility
This washer is dimensionally validated for ZF WG180, WG200, and WG310 series transmissions used in construction machinery. It directly supports differential assemblies in models such as the ZF 4WG-180, 4WG-200, and 5WG-310. Always verify clearance requirements when replacing the 5838300626: DIFFERENTIAL HOUSING or associated bevel gear sets.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports differential carrier rotation |
| 2093209023 | DIFFERENTIAL | Secondary torque distribution unit |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures shift fork alignment |
| 5838300811 | THRUST WASHER | Controls axial play in differential |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 5838300633 | AXLE | Drives final reduction gears |
| 5838300753 | THRUST WASHER | Preloads bevel pinion shaft |
| 5838300818 | THRUST WASHER | Adjusts differential side clearance |
Frequently Asked Questions
Q: Can the 0730.301.114 washer be reused during a differential rebuild?
A: No. This washer is a single-use crush-type shim that deforms under torque. Always install a new OEM washer to maintain factory preload specifications.
Q: How do I verify correct washer thickness for my ZF transmission?
A: Measure the axial clearance between the differential housing and bevel gear using a dial indicator. The 0730.301.114 provides 0.10-0.15 mm preload when torqued to 180 Nm.
Q: Will this washer fit the ZF 4WG-310 transmission?
A: Yes, the 0730.301.114 is compatible with the 4WG-310 differential assembly, provided the housing part number matches the 5838300626 specification.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
