Overview
The ZF 0750.100.162 OIL FEED.HOUSG. is a precision-engineered fluid distribution component designed for the BP210, BP230, WG190, and WG210 series transmissions. This OEM genuine part channels pressurized transmission fluid from the pump to critical lubrication points within the gear train and clutch packs. The SKU 0750.100.162 serves as the central hub that directs oil flow to bearings and shafts, ensuring consistent hydraulic pressure and thermal regulation. Without this housing, the transmission cannot maintain proper lubrication, leading to accelerated wear on internal assemblies.
Symptoms of Failure
- Transmission oil leaks at the housing seam – When the OIL FEED.HOUSG. develops cracks or its mating surface degrades, fluid seeps past the 0634313603: O-RING, leaving visible puddles under the vehicle.
- Erratic gear engagement or slipping – A compromised housing disrupts oil pressure to clutch packs, causing delayed shifts or loss of torque transfer under load.
- Overheating transmission – Restricted oil flow from a damaged feed housing reduces cooling capacity, triggering thermal warnings or burnt fluid odor.
- Whining or grinding noises from the gearbox – Insufficient lubrication due to a faulty housing leads to metal-on-metal contact, producing audible distress during operation.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 0750.100.162 |
| Material | Die-cast aluminum alloy (A380) |
| Weight | 1.45 kg (3.2 lbs) |
| Length | 215 mm |
| Width | 95 mm |
| Height | 70 mm |
| OEM Reference | ZF 0750.100.162 |
| Sealing Surface | Machined flat with O-ring groove |
Compatibility
This OIL FEED.HOUSG. is engineered for ZF’s BP and WG series powershift transmissions. It directly fits the BP210, BP230, WG190, and WG210 models. Additionally, it is compatible with the WG180 and WG200 series when used with the correct 0636115293: 螺栓 and 0631306816: CYLINDRICAL PIN for alignment. The housing also pairs with the 0636100801: CAP SCREW to secure the assembly to the transmission casing. Always verify your transmission model suffix before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 0636115293 | 螺栓 | Secures the oil feed housing to the transmission case |
| 0634313603 | O-RING | Provides a leak-proof seal between housing and mating surface |
| 0631306816 | CYLINDRICAL PIN | Ensures precise alignment of the housing during installation |
| 0636100801 | CAP SCREW | Fastens the housing cover with controlled torque |
| 4681301015 | FIXING PLATE | Locks the housing in position to prevent vibration loosening |
| 4681301016 | SCREEN SHEET | Filters debris from oil entering the feed housing |
| 4681301017 | SCREEN SHEET | Secondary filtration for high-pressure oil circuits |
| 0636100803 | CAP SCREW | Alternate fastener for different housing configurations |
| 4656301023 | GASKET | Provides secondary sealing at the housing interface |
| 0736300182 | TORX SCREW | Tamper-resistant fastener for critical mounting points |
Frequently Asked Questions
Q: Can I install the 0750.100.162 without replacing the O-ring?
A: It is strongly recommended to replace the 0634313603: O-RING whenever the housing is removed. The old seal may have compressed or hardened, leading to immediate leaks after reassembly.
Q: What causes the oil feed housing to fail prematurely?
A: Common causes include overtightening of the 0636100801: CAP SCREW, which can crack the aluminum casting, or contamination in the oil that erodes internal passages. Always use a torque wrench and clean fluid.
Q: Is this part interchangeable between WG190 and WG210 transmissions?
A: Yes, the 0750.100.162 is a direct fit for both WG190 and WG210 models, provided you also use the correct 0631306816: CYLINDRICAL PIN for alignment. Verify your transmission serial number for confirmation.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
