Overview
This OEM genuine ZF shift turret, part number 1316.170.001, is a critical electromechanical interface mounted directly atop the transmission housing. It functions as the primary command center for gear selection, translating mechanical input from the shift linkage into precise hydraulic or pneumatic signals that engage the correct clutch pack and planetary gear set. In construction machinery applications, this component ensures reliable, repeatable shifting under heavy load cycles. The 1316.170.001 shift turret houses the shift forks, detent mechanisms, and position sensors that communicate directly with the transmission control unit (TCU), making it essential for both manual and automated manual transmission (AMT) operations. Without a properly functioning turret, the transmission cannot achieve correct gear engagement, leading to drivability issues and potential internal damage.
Symptoms of Failure
When the ZF 1316.170.001 shift turret begins to wear, operators will notice distinct performance degradation. The following are the most common failure indicators:
- Erratic gear engagement or “gear hunting”: The transmission struggles to find or hold a gear, especially under load, due to worn detent springs or damaged shift fork pads inside the turret assembly.
- Hydraulic fluid seepage from the turret housing: Deteriorated O-rings or gaskets at the base of the turret allow transmission oil to leak externally, often pooling on top of the transmission bell housing.
- Delayed or incomplete shifts: A sluggish response when moving the shift lever, accompanied by a grinding sensation, indicates internal corrosion or binding of the shift rail within the turret bore.
- Intermittent neutral safety switch faults: The machine may fail to start or the transmission may unexpectedly drop into neutral due to faulty position sensor contacts inside the turret.
Technical Specifications
| Parameter | Specification |
|---|---|
| OEM Part Number | 1316.170.001 |
| Housing Material | Die-cast aluminum alloy (A380) |
| Overall Length | 245 mm ± 2 mm |
| Mounting Flange Width | 120 mm |
| Weight | 3.2 kg (7.05 lbs) |
| Operating Temperature Range | -40°C to +120°C |
| Seal Type | Viton® O-rings (2x) + PTFE backup ring |
| OEM Reference | ZF Friedrichshafen AG |
Compatibility
This shift turret is engineered for use in ZF’s heavy-duty powershift and automated manual transmission series commonly deployed in construction machinery. Based on the part number prefix and physical design, the 1316.170.001 is compatible with the following ZF transmission models:
- ZF WG180 series (all variants including WG180C, WG180E)
- ZF WG200 series (WG200C, WG200E, WG200G)
- ZF WG210 series (limited to early production units with mechanical shift turrets)
- ZF Ecomat 4HP590 (when used in off-highway configurations with external shift turret)
Always verify the transmission serial number and existing turret configuration before ordering. This part is not backward-compatible with older ZF 6-speed manual turrets without adapter plates.
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
