ZF 2093.068.014 T 7224 L | OEM Genuine Part

Overview

The ZF 2093.068.014 T 7224 L is a critical OEM genuine internal component designed for heavy-duty powershift transmissions used in construction machinery. This part functions as a precision-machined shaft or gear assembly within the transmission’s planetary gear set, directly influencing torque distribution and gear engagement. The SKU 2093.068.014 ensures exact OEM fitment, eliminating the guesswork of aftermarket substitutes. When installed correctly, it maintains the hydraulic and mechanical integrity of the transmission, allowing for smooth power flow under extreme loads. This component is often replaced in conjunction with the 2093109002: DIFFERENTIAL to restore full drivetrain performance.

Symptoms of Failure

When the ZF 2093.068.014 wears out, operators typically notice these specific failure modes:

• Delayed gear engagement or “gear hunting” – The transmission hesitates before engaging forward or reverse, especially under load, due to worn splines or bearing surfaces on the part.
• Metallic grinding noise from the transmission housing – A high-pitched whine or grinding sound during acceleration indicates excessive play between this component and the 2093309071: DIFF.HOUSING.
• Intermittent loss of drive power – The machine may suddenly lose traction or power to the wheels, particularly when turning, as the part fails to maintain consistent torque transfer.
• Contaminated transmission fluid with metallic debris – Oil analysis reveals high levels of ferrous particles, signaling accelerated wear on the hardened steel surfaces of this OEM part.

Technical Specifications

Compatibility

This OEM genuine part is engineered for ZF powershift transmissions commonly found in wheel loaders, graders, and excavators. It is directly compatible with the following ZF transmission models: WG180, WG200, WG211, and WG310. The 2093.068.014 interfaces with the 2093209095: DIFFERENTIAL assembly and relies on the 0750117075: TAPER ROLLER BEARING for proper axial load support. Always verify your transmission serial number before ordering.

Related Components

Frequently Asked Questions

Q: Can the ZF 2093.068.014 be reused after a transmission overhaul?
A: No. This OEM part is a wear item and should always be replaced with a new genuine unit during a rebuild. Reusing it risks premature failure and damage to the DIFF.HOUSING.

Q: How do I confirm this part fits my ZF WG180 transmission?
A: Check the transmission data plate for the “T 7224 L” suffix. The 2093.068.014 is specifically designed for that variant. Cross-reference with the TAPER ROLLER BEARING part number for complete assembly verification.

Q: What tools are required to install this component?
A: You will need a bearing puller, torque wrench (set to 120 Nm for the retaining nut), and a soft-faced mallet. Always replace the SPRING PIN during installation to ensure proper locking.