Overview
The ZF 2093.110.009 P.T.O. SHAFT is a critical power take-off component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transfers rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or driven equipment, ensuring reliable torque delivery in demanding industrial applications. Positioned within the gear train assembly, this shaft interfaces directly with the 2093109013: DIFFERENTIAL to synchronize power distribution. The SKU 2093.110.009 is precision-machined to OEM tolerances, guaranteeing seamless integration and long service life in ZF drivelines.
Symptoms of Failure
- Audible gear whine or grinding noise during PTO engagement: Worn splines or surface pitting on the shaft cause irregular contact with mating gears, producing distinct metallic sounds under load.
- Intermittent power loss to auxiliary equipment: A failing shaft may slip or fail to transmit full torque, leading to reduced hydraulic pump output or erratic implement operation.
- Visible oil seepage around the PTO housing seal: Shaft wear or scoring damages the lip seal, allowing transmission fluid to escape and contaminating the clutch assembly.
- Vibration or shudder during PTO activation: Bent or fatigued shafts create imbalance, transmitting harsh vibrations through the driveline and accelerating wear on the 0750117075: TAPER ROLLER BEARING.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 2093.110.009 |
| Overall Length | 245 mm |
| Shaft Diameter (bearing journal) | 35 mm |
| Spline Count | 21 involute splines |
| Material | Case-hardened alloy steel (20MnCr5) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2093.110.009 |
| Hardness | 58-62 HRC (surface) |
Compatibility
This P.T.O. shaft is designed exclusively for ZF WG-series transmissions. Confirmed compatible models include:
- ZF WG100
- ZF WG130
- ZF WG131
- ZF WG180 (when used with specific differential housings)
- ZF WG200 (limited to early production runs)
For proper assembly, this shaft must be paired with the 2093209096: DIFFERENTIAL and the 2093309073: DIFF.HOUSING to maintain correct gear mesh alignment.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109013 | DIFFERENTIAL | Distributes torque between output shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209096 | DIFFERENTIAL | Secondary torque split for PTO drive |
| 2093309073 | DIFF.HOUSING | Encloses differential gears and bearings |
| 0631100223 | SPRING PIN | Secures shaft to drive gear |
| 0730300820 | THRUST WASHER | Controls axial shaft end-play |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to wheel axles |
| 2097309085 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Reduces friction on gear faces |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Engages with axle bevel gear |
Frequently Asked Questions
Q: Can the ZF 2093.110.009 be used in a WG180 transmission without modification?
A: Yes, but only when the transmission is equipped with the correct differential housing (part 2093309073). Always verify the spline engagement length before installation.
Q: How do I confirm if my P.T.O. shaft is worn beyond reuse?
A: Measure the spline tooth thickness at three points. If any measurement is below 4.2 mm (new is 4.5 mm), or if visible scoring exceeds 0.3 mm depth, replacement is required to prevent gear damage.
Q: What torque specification should be used for the retaining nut on this shaft?
A: The factory specification is 180 N·m (133 ft-lb) for the locknut, applied after seating the taper roller bearing. Always use a new spring pin (part 0631100223) to secure the nut.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.110.009 P.T.O. SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 2093.110.009 P.T.O. SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 2093.110.009 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.110.009 |
|---|---|
| Normalized SKU | 2093110009 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
