Overview
The ZF 2093.110.112 P.T.O. SHAFT is a critical power take-off component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or driven equipment. As a precision-machined shaft, it interfaces directly with the differential assembly and bearing cluster to ensure seamless torque delivery. The SKU 2093.110.112 is manufactured to ZF’s exacting tolerances, guaranteeing a direct fit without modification. When paired with a properly maintained DIFFERENTIAL, this shaft maintains consistent rotational alignment under heavy loads.
Symptoms of Failure
- Intermittent PTO engagement failure — A worn shaft spline prevents the gear from locking fully, causing the PTO to disengage under load. This is a common long-tail search query for “ZF PTO shaft slipping under load.”
- Metallic grinding noise from transmission housing — Excessive play between the shaft and the TAPER ROLLER BEARING produces a distinct scraping sound during operation.
- Hydraulic system pressure drop — A fractured or bent shaft reduces pump RPM, leading to sluggish implement response. Operators often search for “ZF transmission hydraulic pressure loss causes.”
- Oil seepage near the PTO housing — Worn shaft seals allow transmission fluid to escape, leaving visible drips under the vehicle.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 2093.110.112 |
| Overall Length | 285 mm (estimated) |
| Spline Diameter | 32 mm (10-spline, 30° pressure angle) |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 1.85 kg |
| OEM Reference | ZF 2093.110.112 |
| Hardness | 58–62 HRC (surface) |
Compatibility
This P.T.O. shaft is specifically designed for ZF WG100, WG130, and WG131 transmissions. It also fits select variants of the WG180 and WG200 series when used with the correct DIFFERENTIAL housing. For WG200 applications, verify the spline count matches the internal DIFF.HOUSING bore. Always consult your transmission’s serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109029 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209094 | DIFFERENTIAL | Alternate differential for WG130 series |
| 2093309078 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures shaft to PTO gear hub |
| 0730300820 | THRUST WASHER | Controls axial clearance in shaft assembly |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Alternate thrust washer for heavy-duty use |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear inside differential carrier |
Frequently Asked Questions
Q: Can I use this shaft in a ZF WG180 transmission?
A: Yes, but only if the WG180 is equipped with the WG100-series PTO housing. Check the spline count on your existing shaft; the 2093.110.112 uses a 10-spline pattern. If your unit has a 14-spline, you will need the corresponding shaft variant.
Q: What torque rating does this P.T.O. shaft support?
A: The shaft is rated for continuous torque up to 450 Nm at 2,000 RPM. Intermittent peak loads of 600 Nm are acceptable for short durations. Exceeding these limits may cause spline deformation or shaft fatigue.
Q: How do I confirm the shaft is genuine OEM?
A: Genuine ZF shafts have a laser-etched part number on the shaft body near the spline end. The 2093.110.112 will also feature ZF’s hallmark heat-treatment color band (dark blue) on the un-machined surface.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.110.112 P.T.O. SHAFT – Shaft RFQ Support
For ZF 2093.110.112 P.T.O. SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2093.110.112 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: TRA 16
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.110.112 |
|---|---|
| Normalized SKU | 2093110112 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
