Overview
The ZF 2093.146.008 FRONT WH.DRIVE is a critical OEM genuine component engineered for the front axle output assembly in heavy-duty construction machinery transmissions. This part transfers rotational force from the differential to the front wheel hubs, ensuring consistent traction and load distribution in demanding off-road environments. As a precision-machined drive element, the SKU 2093.146.008 interfaces directly with the axle housing and differential carrier, making it essential for maintaining driveline integrity under high torque loads. When paired with a properly functioning 5838109012: DIFFERENTIAL, this front wheel drive component enables smooth power delivery during steering and articulation cycles.
Symptoms of Failure
- Front axle grinding noise during turns – Worn splines or bearing surfaces in the 2093.146.008 produce metallic grinding sounds when the wheel is steered under load, often misdiagnosed as a differential issue.
- Intermittent wheel slip on uneven terrain – A failing front wheel drive unit causes momentary loss of traction on slopes or loose soil, particularly when the 0750117075: TAPER ROLLER BEARING supporting the output shaft loses preload.
- Oil seepage from the front axle seal area – Degraded O-rings or housing cracks around the 2093.146.008 mounting flange lead to visible gear oil leaks, typically noticed after extended operation in wet conditions.
- Vibration through the steering wheel at low speeds – Excessive clearance in the drive spline causes cyclic vibration that intensifies during tight-radius maneuvers, indicating imminent failure of the 2093209023: DIFFERENTIAL side gear interface.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number / SKU | 2093.146.008 |
| OEM Reference | ZF 2093.146.008 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 4.2 kg (9.26 lbs) |
| Overall Length | 215 mm |
| Spline Diameter | 32 mm (internal) |
| Mounting Bolt Pattern | 6 x M12 on 85 mm PCD |
| Max Torque Capacity | 1,200 Nm |
Compatibility
This front wheel drive component is designed for ZF WG series powershift transmissions commonly installed in wheel loaders, telehandlers, and graders. It is a direct fit for the following transmission models:
- ZF WG180 (all variants)
- ZF WG200 (series 2 and 3)
- ZF WG211 (with front axle disconnect option)
- ZF Ergopower 3 (select configurations)
For proper installation, ensure the mating 5838300626: DIFFERENTIAL HOUSING is free of cracks and the bearing journals are within factory tolerances. Always replace the taper roller bearing (0750117075) simultaneously to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque between left and right front wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports the front wheel drive output shaft |
| 2093209023 | DIFFERENTIAL | Rear differential unit for WG200 transmissions |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses the differential gear set |
| 0631329088 | SPRING PIN | Secures the drive flange to the output shaft |
| 5838300811 | THRUST WASHER | Controls axial play in the differential assembly |
| 5838300721 | AXLE BEVEL GEAR | Transfers power from the pinion to the differential |
| 5838300633 | AXLE | Driveshaft connecting differential to wheel hub |
| 5838300753 | THRUST WASHER | Reduces friction between side gears and housing |
| 5838300818 | THRUST WASHER | Preload spacer for differential bearing pack |
Frequently Asked Questions
Q: Can the 2093.146.008 be installed without replacing the taper roller bearing?
A: It is strongly recommended to replace the 0750117075: TAPER ROLLER BEARING simultaneously. The bearing race often develops brinelling from the same wear cycle, and reusing it will accelerate spline damage on the new front wheel drive unit.
Q: What causes premature failure of this front wheel drive component?
A: The most common root cause is contamination of the gear oil with abrasive particles from a cracked 5838300626: DIFFERENTIAL HOUSING. Always inspect the housing for hairline fractures before installing a replacement 2093.146.008.
Q: Is the 2093.146.008 compatible with ZF WG180 transmissions built before 2005?
A: Yes, this part number supersedes all earlier front wheel drive variants for WG180 models. However, verify that the 2093209023: DIFFERENTIAL side gear spline count matches your unit—older units may use a 28-spline interface instead of the standard 32-spline.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
