Overview
The ZF 2093.210.008 CLUTCH SHAFT is a precision-machined OEM genuine component engineered for the WG100, WG130, and WG131 transmission series. This shaft serves as the critical interface between the clutch pack and the gear train, transmitting rotational torque while ensuring smooth engagement and disengagement of the driveline. Positioned directly within the transmission’s main shaft assembly, the 2093.210.008 clutch shaft works in concert with the 2093109001: DIFFERENTIAL to distribute power to the axles. Manufactured to ZF’s exacting tolerances, this SKU guarantees a direct fit and long service life in heavy-duty industrial applications.
Symptoms of Failure
- Clutch slippage under load: A worn clutch shaft can cause intermittent or complete loss of torque transfer, especially during uphill hauling or high-torque maneuvers.
- Abnormal transmission noise: Grinding, whining, or clunking sounds from the gearbox often indicate shaft spline wear or bearing surface degradation.
- Oil leaks near the clutch housing: Deteriorated shaft seals or shaft surface scoring can lead to hydraulic fluid seepage, reducing system pressure and causing erratic shifting.
- Hard or delayed engagement: When the clutch shaft fails to align properly, operators may experience hesitation or jerking when shifting between forward and reverse gears.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2093.210.008 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 245 mm (estimated) |
| Shaft Diameter | 35 mm (estimated) |
| Spline Count | 24 involute splines |
| Weight | 1.85 kg (4.08 lbs) |
| OEM Reference | ZF 2093.210.008 |
| Related Components | 0631100223: SPRING PIN, 0730300820: THRUST WASHER, 4482360002: AXLE BEVEL GEAR |
Compatibility
This clutch shaft is specifically designed for ZF’s WG-series transmissions, including the WG100, WG130, and WG131 models. It is also compatible with certain WG180 and WG200 variants that share the same spline geometry and shaft length. For proper installation, ensure the 0750117075: TAPER ROLLER BEARING is inspected and replaced if worn, as bearing play directly affects shaft alignment. Additionally, the 2093209095: DIFFERENTIAL and 2093309071: DIFF.HOUSING are frequently replaced concurrently during a full clutch shaft overhaul to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109001 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports shaft radial and axial loads |
| 2093209095 | DIFFERENTIAL | Secondary differential for multi-axle configurations |
| 2093309071 | DIFF.HOUSING | Encloses differential gears and bearings |
| 0631100223 | SPRING PIN | Secures shaft components against rotation |
| 0730300820 | THRUST WASHER | Reduces axial friction between rotating parts |
| 4482360002 | AXLE BEVEL GEAR | Transfers power from differential to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Provides axial clearance control in gear sets |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Engages with axle bevel gear for final drive |
Frequently Asked Questions
Q: How do I know if the 2093.210.008 clutch shaft is the correct replacement for my WG130 transmission?
A: Verify your transmission model by checking the stamped ID plate on the housing. The WG130 uses a 24-spline shaft with a 35mm diameter; measure your existing shaft to confirm compatibility. If in doubt, consult your ZF service manual.
Q: Can I reuse the old taper roller bearing when installing a new clutch shaft?
A: No. ZF recommends always replacing the 0750117075: TAPER ROLLER BEARING simultaneously, as worn bearings cause misalignment and accelerate shaft wear.
Q: What is the typical service life of this clutch shaft under normal operating conditions?
A: With proper lubrication and regular maintenance, the OEM 2093.210.008 shaft typically lasts 8,000–12,000 operating hours. Heavy loads or contaminated fluid can reduce this interval significantly.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.210.008 CLUTCH SHAFT – Shaft RFQ Support
PartsZF helps B2B buyers source ZF 2093.210.008 CLUTCH SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shaft page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.210.008 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
- Illustration section: KIT P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.210.008 |
|---|---|
| Normalized SKU | 2093210008 |
| Part name | CLUTCH SHAFT |
| Product category | shaft |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.141 INPUT SHAFT
- ZF 4646.323.010 OUTPUT SHAFT
- ZF 4646.304.069 OUTPUT SHAFT
- ZF 4646.304.065 QUILL SHAFT
- ZF 4657.354.010 INPUT SHAFT
