Overview
The ZF 2093.213.023 KUPPLUNGSGLOCKE (clutch housing bell housing) is a critical structural component in heavy-duty ZF transmissions used in construction machinery. This OEM genuine part serves as the rigid mounting interface between the engine flywheel housing and the transmission casing, precisely aligning the input shaft and torque converter assembly. The SKU 2093.213.023 is engineered to withstand high torsional loads and thermal expansion in demanding environments like wheel loaders and graders. When installed, this housing directly supports the 5838109012: DIFFERENTIAL assembly, ensuring concentric alignment for the drivetrain.
Symptoms of Failure
- Transmission oil leaks at the bell housing gasket: A cracked or warped KUPPLUNGSGLOCKE causes fluid seepage, leading to low lubricant levels and eventual gear damage.
- Vibration during clutch engagement: Wear or distortion in the housing creates misalignment, resulting in harsh shifting and shuddering under load.
- Premature bearing failure in the input shaft: A compromised bell housing fails to maintain proper preload on the 0750117075: TAPER ROLLER BEARING, accelerating wear and noise.
- Difficulty mounting the transmission to the engine: Bent mounting flanges or stripped bolt holes prevent secure installation, causing driveline instability.
Technical Specifications
| Parameter | Value |
|---|---|
| OEM Part Number | 2093.213.023 |
| Material | High-grade cast iron (GGG-40) |
| Overall Diameter | 410 mm (16.1 in) |
| Overall Length | 185 mm (7.3 in) |
| Mounting Bolt Pattern | 12 x M12 bolts on 340 mm PCD |
| Weight | 14.2 kg (31.3 lbs) |
| OEM Reference | ZF 2093.213.023 |
Compatibility
This KUPPLUNGSGLOCKE is designed for ZF WG180, WG200, and WG210 series transmissions commonly found in construction machinery such as compactors, backhoe loaders, and telehandlers. It also fits select Ecomat 4HP and 6HP variants used in medium-duty applications. The housing integrates with the 2093209023: DIFFERENTIAL and the 5838300626: DIFFERENTIAL HOUSING to form the complete rear drivetrain module.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109012 | DIFFERENTIAL | Distributes torque to drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports input shaft radial loads |
| 2093209023 | DIFFERENTIAL | Secondary differential for planetary gears |
| 5838300626 | DIFFERENTIAL HOUSING | Encloses differential gear set |
| 0631329088 | SPRING PIN | Secures shift fork alignment |
| 5838300811 | THRUST WASHER | Controls axial play in differential |
| 5838300721 | AXLE BEVEL GEAR | Transfers power to wheel hubs |
| 5838300633 | AXLE | Driveshaft connection to final drive |
| 5838300753 | THRUST WASHER | Reduces friction in planetary carrier |
| 5838300818 | THRUST WASHER | Spacer for differential side gears |
Frequently Asked Questions
Q: Can the 2093.213.023 be repaired if it has a hairline crack?
A: No. Cast iron bell housings cannot be reliably welded due to stress concentration. Replacement with this OEM genuine part is the only safe solution to prevent catastrophic driveline failure.
Q: Does this part include the mounting bolts?
A: No. The KUPPLUNGSGLOCKE is sold as a bare housing. You must order the 0631329088: SPRING PIN and M12 bolts separately for proper installation.
Q: Will this fit a ZF WG180 transmission from a 2015 Volvo L60H loader?
A: Yes. The WG180 series uses this exact bell housing pattern. Verify your engine flywheel housing matches the 340 mm PCD before ordering.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
