Overview
The ZF 2093.298.067 INPUT SHAFT is a critical power-transfer component engineered for the WG100, WG130, and WG131 series transmissions. As the primary torque receiver from the engine clutch, this OEM genuine part channels rotational force into the gear train with minimal energy loss. The SKU 2093.298.067 is precision-machined to interface directly with the 2093109002: DIFFERENTIAL assembly, ensuring synchronized power distribution. Located at the transmission’s forward housing, this shaft supports the initial gear reduction stage and must withstand high cyclic loads without deformation.
Symptoms of Failure
- Audible grinding or whining noise during acceleration: Worn splines on the input shaft cause irregular gear meshing, producing a distinct metallic sound that intensifies under load.
- Delayed or harsh gear engagement: Excessive play in the shaft bearing journal prevents smooth clutch-to-transmission power transfer, leading to jarring shifts.
- Visible oil seepage near the bell housing: A compromised shaft seal surface allows transmission fluid to escape, often accompanied by a burnt smell from friction wear.
- Vibration through the clutch pedal or driveline: Bent or fatigued input shafts create rotational imbalance, transmitting tremor through the entire powertrain at highway speeds.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (OEM) | 2093.298.067 |
| Overall Length | 285 mm (estimated) |
| Spline Diameter | 32 mm (10-spline, metric) |
| Bearing Journal Diameter | 45 mm |
| Material | Case-hardened alloy steel (20MnCr5) |
| Weight | 2.8 kg (6.2 lbs) |
| Surface Treatment | Black oxide corrosion resistance |
| OEM Reference | ZF 2093.298.067 |
Compatibility
This input shaft is specifically designed for ZF’s WG-series modular transmissions. Verified compatible models include WG100, WG130, and WG131. It also fits select variants of the WG180 and WG200 when used with the appropriate 0750117075: TAPER ROLLER BEARING kit. For differential housing integration, pair this shaft with the 2093309071: DIFF.HOUSING to maintain proper alignment. Always cross-reference your transmission serial number before ordering.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109002 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2093209095 | DIFFERENTIAL | Secondary torque split assembly |
| 2093309071 | DIFF.HOUSING | Encloses differential gear set |
| 0631100223 | SPRING PIN | Secures shaft alignment within housing |
| 0730300820 | THRUST WASHER | Reduces axial end-play on shaft |
| 4482360002 | AXLE BEVEL GEAR | Transfers power to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Controls lateral shaft movement |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Provides final gear reduction |
Frequently Asked Questions
Q: Can the ZF 2093.298.067 input shaft be used in a WG180 transmission without modification?
A: While the shaft physically fits WG180 housings, we recommend installing the 2093209095: DIFFERENTIAL and verifying bearing preload with the 0750117075: TAPER ROLLER BEARING to avoid premature wear.
Q: What causes premature failure of this input shaft?
A: The most common cause is contamination from worn 0730300820: THRUST WASHER debris, which scores the shaft surface. Always replace the 0631100223: SPRING PIN during installation to prevent housing shift.
Q: How do I confirm this part fits my specific ZF transmission?
A: Check the transmission model plate near the PTO cover. If the model reads WG100, WG130, or WG131, the 2093.298.067 shaft is a direct OEM replacement. For other models, consult the 4482360001: DIFFERENTIAL BEVEL GEAR compatibility chart.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2093.298.067 INPUT SHAFT – Shaft RFQ Support
PartsZF helps B2B buyers source ZF 2093.298.067 INPUT SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shaft page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2093.298.067 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: SPLITTER BOX
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2093.298.067 |
|---|---|
| Normalized SKU | 2093298067 |
| Part name | INPUT SHAFT |
| Product category | shaft |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.141 INPUT SHAFT
- ZF 4646.323.010 OUTPUT SHAFT
- ZF 4646.304.069 OUTPUT SHAFT
- ZF 4646.304.065 QUILL SHAFT
- ZF 4657.354.010 INPUT SHAFT
