Overview
The ZF 2093.310.174 SLEEVE CARRIER is a precision-machined OEM genuine component designed to support and align the differential assembly within ZF heavy-duty transmissions. This sleeve carrier acts as a critical mounting interface, ensuring correct gear mesh and load distribution during high-torque operations in construction machinery. The SKU 2093.310.174 is engineered to exact factory tolerances, reducing vibration and preventing premature wear on surrounding drivetrain components. It sits directly between the differential housing and the axle bevel gear set, making it indispensable for maintaining driveline integrity under extreme loads.
Symptoms of Failure
- Oil leaks near the differential housing: A worn sleeve carrier can compromise sealing surfaces, leading to visible fluid seepage around the transmission case.
- Gear slipping or erratic engagement: When the carrier loses its dimensional stability, gear alignment shifts, causing intermittent power loss or harsh shifting during operation.
- Metallic grinding noises from the axle area: Excessive play in the sleeve carrier allows metal-on-metal contact between the differential and housing, producing audible grinding under load.
- Increased drivetrain vibration: A degraded carrier fails to dampen torsional forces, transmitting vibration through the chassis and accelerating wear on adjacent bearings.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 2093.310.174 |
| Material | High-strength alloy steel (induction-hardened) |
| Outer Diameter | 120 mm (estimated) |
| Inner Diameter | 85 mm (estimated) |
| Length | 95 mm (estimated) |
| Weight | 1.8 kg (estimated) |
| OEM Reference | ZF 2093.310.174 |
Compatibility
This sleeve carrier is primarily used in ZF WG180, WG200, and WG250 series transmissions found in wheel loaders, excavators, and telehandlers. It is also compatible with select ZF 4WG-200 and 6WG-200 models used in construction machinery. Always verify fitment by cross-referencing your transmission serial number with the OEM part number 2093.310.174.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2093109029 | DIFFERENTIAL | Distributes torque between drive wheels |
| 0750117075 | TAPER ROLLER BEARING | Supports axial and radial loads on the differential shaft |
| 2093209094 | DIFFERENTIAL | Secondary differential for multi-axle configurations |
| 2093309078 | DIFF.HOUSING | Encloses and protects the differential gear set |
| 0631100223 | SPRING PIN | Secures the sleeve carrier to the housing |
| 0730300820 | THRUST WASHER | Reduces friction between rotating components |
| 4482360002 | AXLE BEVEL GEAR | Transfers power from differential to axle shafts |
| 2097309085 | DIFFERENTIAL AXLE | Connects differential to wheel hubs |
| 5838300811 | THRUST WASHER | Controls axial play in the differential assembly |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear for torque splitting |
Frequently Asked Questions
Q: Can the ZF 2093.310.174 sleeve carrier be reused after disassembly?
A: No. This is a wear-critical component. Reusing it risks misalignment and accelerated failure of the differential assembly. Always replace with a new OEM genuine part.
Q: What tools are required to install the 2093.310.174?
A: Installation typically requires a bearing press, torque wrench, and alignment fixtures. Refer to the ZF service manual for your specific transmission model for exact procedures.
Q: How does this part interact with the 0750117075 TAPER ROLLER BEARING?
A: The sleeve carrier provides the precise bore diameter and surface finish needed for the taper roller bearing to seat correctly. A worn carrier will cause the bearing to run off-center, leading to premature bearing failure.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
