ZF 2093.313.107 PRESSURE PLATE | OEM Genuine Part

Overview

The ZF 2093.313.107 PRESSURE PLATE is a critical OEM genuine component engineered for the clutch pack assembly within heavy-duty ZF transmissions. This part applies precise clamping force to the friction discs, enabling smooth torque transfer and gear engagement under high-load conditions common in construction machinery. As a genuine ZF part, the 2093.313.107 ensures factory-specified diaphragm tension and thermal stability, directly influencing shift quality and driveline longevity. When paired with a properly functioning 5838109009: DIFFERENTIAL and 0750117075: TAPER ROLLER BEARING, this pressure plate maintains the axial alignment necessary for reliable power distribution.

Symptoms of Failure

• Clutch Slippage Under Load: When the pressure plate loses its spring tension, the transmission may slip during acceleration or when climbing grades, often accompanied by a burning smell.
• Hard Shifting or Gear Drag: A warped or fatigued pressure plate prevents complete clutch disengagement, causing grinding noises when shifting between forward and reverse gears.
• Oil Contamination from Friction Wear: Excessive wear on the pressure plate surface can shed metallic particles into the transmission fluid, leading to clogged filters and reduced hydraulic pressure.
• Vibration During Torque Transfer: An uneven pressure plate face creates chatter or low-frequency vibration in the driveline, particularly noticeable at low engine RPM.

Technical Specifications

Compatibility

This pressure plate is designed for use in ZF WG-series powershift transmissions commonly deployed in wheel loaders, graders, and material handlers. Based on its clutch pack configuration, the 2093.313.107 is compatible with the following ZF transmission models: WG180, WG200, WG210, and WG211. It also integrates with the 2093209023: DIFFERENTIAL assembly and the 5838300626: DIFFERENTIAL HOUSING to complete the final drive unit. Always verify your transmission serial number before ordering.

Related Components

Frequently Asked Questions

Q: How do I know if my ZF 2093.313.107 pressure plate is worn out?
A: Measure the plate thickness with a micrometer; if it is below 8.0 mm, replacement is necessary. Also inspect for heat discoloration or radial cracks on the friction surface.

Q: Can I install this pressure plate without replacing the clutch discs?
A: It is strongly recommended to replace the entire clutch pack simultaneously. A new pressure plate paired with worn friction discs will cause uneven wear and premature failure.

Q: Is the 2093.313.107 compatible with aftermarket differentials?
A: This OEM part is designed for genuine ZF assemblies. For best results, use it with the 5838109009: DIFFERENTIAL and 5838300626: DIFFERENTIAL HOUSING to maintain proper clutch pack clearance.