Overview
The ZF 2094.110.001 P.T.O. SHAFT is a critical power take-off shaft engineered specifically for the WG100, WG130, and WG131 transmission series. This OEM genuine part transfers rotational energy from the transmission’s main drive to auxiliary equipment, such as hydraulic pumps or winches, ensuring seamless power distribution in heavy-duty industrial applications. The SKU 2094.110.001 sits within the gear train assembly, directly engaging with the 2094104412: MAIN SHAFT to synchronize torque output. Precision-machined from high-grade alloy steel, this shaft withstands extreme torsional loads while maintaining alignment with the 2094106010: SHIFT SYSTEM for reliable gear engagement.
Symptoms of Failure
- Intermittent PTO engagement failure – Worn splines on the 2094.110.001 shaft cause the power take-off to disengage unexpectedly under load, often misdiagnosed as a clutch issue.
- Metallic grinding noise during operation – Deteriorated bearing surfaces or micro-fractures in the shaft produce a distinct grinding sound, especially when the 2094206001: GEARSHIFT SHAFT is actuated.
- Hydraulic pump output drop – A failing P.T.O. shaft reduces rotational speed to auxiliary pumps, leading to sluggish hydraulic response in loaders or cranes.
- Visible oil seepage near the PTO housing – Cracked shaft seals or worn mating surfaces allow transmission fluid to escape, contaminating the 2094304054: MAIN SHAFT assembly.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2094.110.001 |
| Overall Length | 245 mm (estimated) |
| Shaft Diameter | 32 mm (spline section) |
| Spline Count | 14-tooth involute spline |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 1.85 kg (approx.) |
| OEM Reference | ZF 2094.110.001 |
| Surface Treatment | Phosphate coating for corrosion resistance |
Compatibility
This P.T.O. shaft is factory-specified for ZF WG100, WG130, and WG131 transmissions used in agricultural tractors, construction loaders, and industrial material handlers. It also retrofits into WG180 and WG200 series gearboxes when paired with the correct 2094106010: SHIFT SYSTEM adapter kit. Always verify spline alignment with your existing 2094304054: MAIN SHAFT before installation. For WG200 applications, the 2094206001: GEARSHIFT SHAFT must be replaced simultaneously to prevent premature wear.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2094104412 | MAIN SHAFT | Transfers primary torque from engine to gear train |
| 2094304054 | MAIN SHAFT | Secondary shaft supporting reverse gear assembly |
| 2094106010 | SHIFT SYSTEM | Controls gear engagement via hydraulic or mechanical linkage |
| 2094206001 | GEARSHIFT SHAFT | Transmits shift fork motion to synchronizers |
| 2094306053 | GEARSHIFT SHAFT | Alternate length shaft for WG131 models |
| 0630513070 | SNAP RING | Secures shaft bearings in housing bore |
| 2094306019 | WASHER | Thrust washer for axial load distribution |
| 0732040444 | COMPRESSION SPRING | Provides preload for shift detent mechanism |
| 0732040728 | COMPRESSION SPRING | Heavy-duty spring for high-torque PTO applications |
| 2093206001 | BUSH | Bronze bushing supporting PTO shaft journal |
Frequently Asked Questions
Q: Can the ZF 2094.110.001 be used in a WG180 transmission without modification?
A: Direct fit is possible only if the transmission uses the same 14-tooth spline pattern as WG100/WG130. For WG180 units with a 16-tooth output, you must also replace the 2094104412: MAIN SHAFT to match spline count.
Q: What causes premature wear on this P.T.O. shaft?
A: The most common cause is misalignment between the PTO shaft and the driven equipment, often compounded by a worn 2093206001: BUSH. Always inspect the bushing and replace the 0630513070: SNAP RING during installation.
Q: Does this part include the necessary snap rings and washers?
A: No, the 2094.110.001 is sold as a bare shaft. You will need to order the 2094306019: WASHER and 0732040444: COMPRESSION SPRING separately for a complete rebuild.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
ZF 2094.110.001 P.T.O. SHAFT – Shaft RFQ Support
For ZF 2094.110.001 P.T.O. SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2094.110.001 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2094.110.001 |
|---|---|
| Normalized SKU | 2094110001 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
