ZF 2094.110.007 P.T.O. SHAFT for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2094.110.007 P.T.O. SHAFT is a critical power take-off (PTO) shaft designed for integration within the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits engine torque directly to auxiliary hydraulic pumps or driven equipment, ensuring reliable power distribution from the transmission’s internal gear train. As a precision-machined component, the SKU 2094.110.007 sits within the PTO housing assembly, interfacing with the 2094101012: TRANSMISSION HOUSING to maintain proper alignment and load-bearing capacity. Its splined design and hardened steel construction are engineered to withstand continuous high-torque applications in industrial and commercial vehicles.

Symptoms of Failure

• PTO engagement grinding or whining noise: Worn splines on the 2094.110.007 shaft cause audible metallic sounds during clutch engagement, often misdiagnosed as gear wear.
• Intermittent power loss to auxiliary equipment: A failing shaft leads to slippage under load, resulting in reduced hydraulic pump output or erratic operation of driven implements.
• Oil leaks near the PTO housing: Shaft wear damages the adjacent 0750111371: SHAFT SEAL, allowing transmission fluid to escape and contaminating the clutch pack.
• Vibration during PTO operation: Bent or fatigued shafts create harmonic vibrations that accelerate bearing failure in the 2094301036: HOUSING.

Technical Specifications

Compatibility

This PTO shaft is engineered for ZF WG-series transmissions, specifically the WG100, WG130, and WG131 models. It also fits select WG180 and WG200 variants when paired with the correct 2094298057: HOUSING and 2094301071: COVER. Always verify your transmission’s serial number against ZF’s compatibility chart, as the shaft’s spline count and pilot bore depth vary between WG130 and WG131 revisions. For proper sealing, replace the 0634303085: O-RING and 2094301030: GASKET during installation.

Related Components

{
“@context”: “https://schema.org”,
“@type”: “FAQPage”,
“mainEntity”: [
{
“@type”: “Question”,
“name”: “What is the ZF 2094.110.007 P.T.O. shaft used for?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “This OEM genuine shaft transmits engine torque from ZF WG100, WG130, and WG131 transmissions to auxiliary PTO-driven equipment such as hydraulic pumps, ensuring reliable power take-off in industrial vehicles.”
}
},
{
“@type”: “Question”,
“name”: “How do I know if my 2094.110.007 shaft is failing?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “Common failure signs include grinding noises during PTO engagement, intermittent power loss to auxiliary equipment, oil leaks near the PTO housing, and vibration during operation. These symptoms often indicate worn splines or a bent shaft.”
}
},
{
“@type”: “Question”,
“name”: “Can the 2094.110.007 shaft be installed without replacing the seal?”,
“acceptedAnswer”: {
“@type”: “Answer”,
“text”: “No. ZF recommends always replacing the shaft seal (part 0750111371) and O-ring (0634303085) when installing a new PTO shaft to prevent premature oil leakage and ensure proper sealing against the housing.”
}
}
]
}