ZF 2094.310.107 CONSOLE | OEM Genuine Part

Overview

The ZF 2094.310.107 CONSOLE is a critical structural component within ZF heavy-duty powershift transmissions, serving as the primary mounting interface between the transmission assembly and the vehicle chassis. This OEM genuine part, identified by SKU 2094.310.107, provides precise alignment for the transmission housing and absorbs significant torsional loads during operation in construction machinery. As a load-bearing bracket, it ensures that the transmission maintains its correct angular position relative to the driveline, preventing undue stress on connected shafts and seals. The console works in concert with the 2094101017: TRANSMISSION HOUSING to create a rigid structural envelope that protects internal gear sets from misalignment under heavy excavation and loading cycles.

Symptoms of Failure

• Transmission mounting bolt loosening or shearing – A worn or cracked console allows the transmission to shift position, causing mounting bolts to work loose or snap under vibration. This is often detected during routine “construction machinery transmission inspection” checks.
• Driveline vibration under load – When the console loses its dimensional integrity, the transmission angle changes, producing a distinct low-frequency vibration during digging or pushing operations. This symptom is frequently searched as “ZF transmission shaking when loading”.
• Oil seepage at housing joints – A deformed console forces the 2094301069: HOUSING out of alignment, breaking the seal between mating surfaces. Operators may notice “transmission oil leak near mounting bracket” as a specific failure indicator.
• Premature wear on output shaft seals – Misalignment caused by a failing console accelerates wear on the 0750111371: SHAFT SEAL, leading to rapid fluid loss and eventual gear slippage.

Technical Specifications

Compatibility

This console is engineered for ZF powershift transmissions commonly found in wheel loaders, dozers, and graders. Based on its structural design and mounting pattern, the 2094.310.107 is compatible with the following ZF transmission models: WG180, WG200, WG211, and WG250. It also fits select iterations of the 4WG-200 and 6WG-200 series used in heavy construction equipment. When replacing this part, always inspect the mating 2094298054: HOUSING for cracks, and replace the 0636302008: SCREW PLUG to ensure proper sealing of the mounting bolt holes.

Related Components