Overview
The ZF 2094.310.125 CONSOLE is a critical structural bracket designed to secure and position the transmission assembly within heavy construction machinery. This OEM genuine part acts as the primary mounting interface, absorbing torsional loads and maintaining precise alignment between the powertrain and the vehicle chassis. As an integral component of the transmission support system, the SKU 2094.310.125 ensures that the gearbox remains stable during high-torque operations, preventing misalignment that can lead to premature wear on adjacent assemblies. This console is typically bolted directly to the 2094101017: TRANSMISSION HOUSING and works in conjunction with the 2094301069: HOUSING to form a rigid mounting cradle.
Symptoms of Failure
- Transmission vibration at idle or under load: A worn or cracked console allows the transmission to shift out of its designed position, causing noticeable shaking that worsens during gear changes.
- Oil seepage around mounting bolts: When the console fatigues, it can distort the sealing surface of the 2094298054: HOUSING, leading to slow fluid leaks that are often mistaken for gasket failure.
- Abnormal driveline noise during acceleration: A loose console permits the transmission to rock under torque, producing metallic clunking or grinding sounds from the universal joints.
- Difficulty engaging gears: Misalignment caused by a failing console alters the shift linkage geometry, resulting in hard or imprecise gear selection.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2094.310.125 |
| Material | Ductile cast iron (GGG-40) |
| Weight | 3.2 kg (7.05 lbs) |
| Overall Dimensions | 210 mm x 145 mm x 85 mm |
| Bolt Hole Pattern | 4x M12 on 90 mm centers |
| OEM Reference | ZF 2094.310.125 |
| Surface Finish | Phosphate coated |
Compatibility
This console is engineered for ZF WG-series powershift transmissions commonly found in wheel loaders, graders, and excavators. It is a direct fit for the WG180, WG200, and WG210 models, where it serves as the right-side mounting bracket. The part also integrates with the 0636302008: SCREW PLUG used to seal the oil gallery within the console assembly. For earlier WG150 and WG160 variants, verify the bolt pattern compatibility before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2094101017 | TRANSMISSION HOUSING | Main gearbox casing |
| 2094301069 | HOUSING | Rear bearing support |
| 2094298054 | HOUSING | Clutch housing adapter |
| 0636302008 | SCREW PLUG | Oil port seal |
| 0634801165 | SEALING RING | Hydraulic seal |
| 0635460022 | BALL | Check valve ball |
| 2094301071 | COVER | Access port cover |
| 2094301030 | GASKET | Housing seal |
| 0750111371 | SHAFT SEAL | Output shaft seal |
| 0634303085 | O-RING | Hydraulic o-ring |
