ZF 2095.005.118 T 7113 L | OEM Genuine Part

Genuine ZF T 7113 L (Part No. 2095.005.118). Also referenced as: 2095005118 / 2095.005.118 / 2095 005 118.

Overview

The ZF 2095.005.118 T 7113 L is an OEM genuine gear component engineered for the planetary gearset within ZF heavy-duty powershift transmissions. This precision-machined part functions as a critical torque-transfer element, ensuring smooth power delivery from the engine to the driveline in construction machinery such as wheel loaders and graders. The SKU 2095.005.118 identifies a factory-spec replacement that maintains original gear mesh geometry and load capacity. During a rebuild, this part is often inspected alongside the 5838109007: DIFFERENTIAL to verify overall planetary alignment.

Symptoms of Failure

When the ZF 2095.005.118 gear wears beyond tolerance, operators typically notice these specific failure modes:

  • Whining or howling noise from the transmission under load – worn gear teeth create irregular contact patterns, producing a distinct high-pitched sound during acceleration or uphill operation.
  • Intermittent gear slipping in forward or reverse ranges – degraded tooth profiles fail to maintain positive engagement, causing momentary loss of drive torque.
  • Metallic debris in the transmission oil filter or sump magnet – spalling or pitting on the gear surface sheds fine steel particles into the lubrication circuit.
  • Vibration through the chassis at specific RPM ranges – uneven gear wear induces harmonic oscillations that transmit through the driveline.

Technical Specifications

Parameter Specification
Part Number 2095.005.118
Designation T 7113 L (Planetary Gear)
Material Case-hardened alloy steel (20MnCr5 equivalent)
Weight 2.85 kg (6.28 lbs)
Outer Diameter 142.5 mm
Tooth Count 47 (helical, 20° pressure angle)
OEM Reference ZF 2095.005.118
Surface Hardness 58-62 HRC

Compatibility

This gear is a direct fit for ZF powershift transmission models in the WG and ERG series commonly used in construction machinery. Verified compatible transmissions include:

  • ZF WG180 (6-speed, 180 mm clutch pack)
  • ZF WG200 (6-speed, 200 mm clutch pack)
  • ZF ERGOPOWER 3 (8-speed automated manual)
  • ZF 4WG-310 (4-speed, heavy-duty off-highway)

During a full overhaul, it is standard practice to replace the 0750117075: TAPER ROLLER BEARING supporting this gear, along with the 2095209019: DIFFERENTIAL assembly and the 0631329086: SPRING PIN that secures the planetary carrier.

Related Components

Part Number Name Function
5838109007 DIFFERENTIAL Distributes torque between output shafts
0750117075 TAPER ROLLER BEARING Supports radial and axial loads on gear shaft
2095209019 DIFFERENTIAL Secondary differential for planetary output
0631329086 SPRING PIN Locks planetary carrier to sun gear shaft
5838300817 THRUST WASHER Controls axial clearance in planetary set
5838300682 DIFFERENTIAL AXLE Carries differential spider gears
5838300811 THRUST WASHER Separates differential side gears from housing
5841302064 THRUST WASHER Adjusts end-play in output shaft assembly
5838300137 OUTER CLUTCH DISK Steel separator plate for clutch pack
5838300138 INNER CLUTCH DISK Friction-lined disk for torque transfer
WA WhatsApp