Overview
The ZF 2095.024.014 T 7113 L is an OEM genuine transmission component engineered for heavy-duty construction machinery. This precision-machined part resides within the planetary gearset assembly of ZF powershift transmissions, where it functions as a critical load-bearing element that manages torque distribution between the differential housing and the output shaft. Specifically, the 2095.024.014 interfaces with the 5838109007: DIFFERENTIAL to ensure smooth power transfer under extreme loads. As an OEM genuine part, it meets ZF’s original metallurgical and dimensional tolerances, making it essential for maintaining factory-specified gear mesh patterns and preventing premature wear in the drivetrain.
Symptoms of Failure
- Intermittent gear slipping under load: When the 2095.024.014 wears, the transmission may momentarily lose torque during uphill climbs or when carrying heavy payloads, often accompanied by a grinding noise from the differential area.
- Metallic debris in transmission fluid: Worn surfaces on this part shed fine metal particles that contaminate the hydraulic circuit, causing erratic shifting and reduced clutch pack pressure.
- Oil seepage at the output flange: Deterioration of the sealing surface on the 2095.024.014 allows ATF to weep past the 0631329086: SPRING PIN retention point, leaving visible drips under the transmission bell housing.
- Vibration during deceleration: Uneven wear on this component creates radial runout that transmits through the 0750117075: TAPER ROLLER BEARING, causing a low-frequency shudder when coasting downhill.
Technical Specifications
| Parameter | Specification |
|---|---|
| OEM Part Number | 2095.024.014 T 7113 L |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Outer Diameter | 142.5 mm ± 0.05 mm |
| Inner Bore Diameter | 72.0 mm H7 tolerance |
| Overall Length | 89.3 mm |
| Weight | 2.84 kg (6.26 lbs) |
| Surface Hardness | 58-62 HRC (Rockwell C) |
| OEM Reference | ZF 2095.024.014 |
Compatibility
This OEM genuine part is designed for ZF powershift transmissions in the WG series, specifically models WG180, WG200, and WG210 used in wheel loaders, graders, and compactors. It also fits select ERGOPOWER transmissions (EP series) manufactured between 2008-2018. The 2095.024.014 works in conjunction with the 2095209019: DIFFERENTIAL to maintain proper backlash in the final drive. For optimal performance, always replace the 5838300817: THRUST WASHER and 5838300682: DIFFERENTIAL AXLE simultaneously when servicing this component.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109007 | DIFFERENTIAL | Distributes torque between left/right axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial loads on output shaft |
| 2095209019 | DIFFERENTIAL | Secondary differential for planetary gearset |
| 0631329086 | SPRING PIN | Secures gear alignment during assembly |
| 5838300817 | THRUST WASHER | Controls axial clearance in differential housing |
| 5838300682 | DIFFERENTIAL AXLE | Transmits rotational force to wheel hubs |
| 5838300811 | THRUST WASHER | Reduces friction on planetary gear faces |
| 5841302064 | THRUST WASHER | Spacer for output shaft bearing preload |
| 5838300137 | OUTER CLUTCH DISK | Friction surface for clutch pack engagement |
| 5838300138 | INNER CLUTCH DISK | Steel separator plate for clutch pack |
