ZF 2095.068.010 T 7100 L | OEM Genuine Part

Overview

The ZF 2095.068.010 T 7100 L is an OEM genuine transmission component engineered for the demanding environment of construction machinery. This part functions as a critical load-bearing and alignment element within the final drive assembly of ZF powershift transmissions. It ensures precise torque transfer and maintains the correct positional relationship between the differential and the axle housing. The SKU 2095.068.010 is a direct replacement for the original factory-installed unit, guaranteeing exact fitment and metallurgical standards required for heavy earthmoving equipment.

Symptoms of Failure

• Low-speed grinding noise from the axle housing: When the 2095.068.010 wears, you may hear a rhythmic grinding or rumbling sound during tight turns or low-speed maneuvers, indicating excessive clearance in the differential assembly.
• Oil seepage around the pinion seal area: A worn part can cause misalignment that compromises the seal, leading to visible gear oil leaks on the axle tube or differential housing.
• Intermittent gear slipping under load: As this component loses its dimensional integrity, the transmission may momentarily lose drive engagement when climbing slopes or pushing heavy loads, often misdiagnosed as a clutch issue.
• Vibration in the driveline at constant speed: Deterioration of this part introduces play that creates a low-frequency vibration felt through the chassis, particularly between 15-25 mph.

Technical Specifications

Compatibility

This genuine ZF 2095.068.010 component is primarily used in the final drive section of the following ZF transmission models found in construction machinery: WG180, WG200, WG210, and WG220. It is also compatible with certain variants of the ERGO series transmissions used in telehandlers and wheel loaders. Always verify your transmission serial number against the OEM parts catalog before ordering.

During installation, this part works in conjunction with the 2095109013 DIFFERENTIAL to establish the correct preload on the ring gear. The 0750117075 TAPER ROLLER BEARING must be inspected simultaneously, as wear on the 2095.068.010 often damages the bearing race. Additionally, the 2095209037 DIFFERENTIAL and 2095309059 DIFF.HOUSING should be checked for scoring or fretting when replacing this unit.

Related Components