Overview
This OEM genuine ZF 2095.080.003 T 7140 is a high-precision hydraulic control valve assembly, engineered specifically for the clutch modulation and lubrication circuits within heavy-duty ZF powershift transmissions. Positioned on the valve body or transmission housing, it regulates oil flow and pressure to ensure smooth gear engagement under extreme loads. The SKU 2095.080.003 is a factory-sealed unit, guaranteeing exact OEM tolerances for construction machinery applications. Replacing this component restores precise hydraulic command, preventing erratic shifting and protecting internal planetary gearsets from thermal damage.
Symptoms of Failure
When the ZF 2095.080.003 begins to degrade, operators will notice distinct performance issues. Identifying these early can prevent costly drivetrain overhauls.
- Delayed or harsh gear engagement: A worn spool or damaged spring inside the valve causes a lag when shifting from neutral to forward or reverse, often accompanied by a jarring clunk.
- Transmission oil leaks at the valve body: Cracks in the housing or degraded O-rings around the 2095.080.003 assembly lead to visible drips of ATF, especially after the machine has been running.
- Intermittent clutch slip under load: Inconsistent hydraulic pressure from a sticking valve results in momentary power loss when the machine is climbing or pushing heavy material.
- Erratic or no response in cold start conditions: A failing valve may not modulate flow correctly when the oil is viscous, causing the transmission to stay in neutral until the system warms up.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number / SKU | 2095.080.003 |
| OEM Reference | ZF T 7140 |
| Component Type | Hydraulic Control Valve (Modulation/Lube) |
| Body Material | High-Tensile Aluminum Alloy (A356-T6) |
| Seal Material | Nitrile Rubber (NBR) / Viton |
| Overall Dimensions (L x W x H) | Approx. 180 mm x 95 mm x 65 mm |
| Dry Weight | 1.45 kg (3.2 lbs) |
| Operating Pressure Range | 10 – 25 bar (145 – 362 psi) |
| Thread Port Size | M14 x 1.5 (Inlet/Outlet) |
Compatibility
This genuine ZF 2095.080.003 valve is designed for use in the following ZF transmission families commonly found in wheel loaders, graders, and telehandlers. Always verify your transmission serial number before ordering.
- ZF WG 180 (4-speed powershift)
- ZF WG 200 (5-speed powershift)
- ZF WG 211 (Heavy-duty off-highway)
- ZF 4WG-200 (Ergopower series)
- ZF 5WG-200 (Ergopower series)
Cross-reference with OEM part numbers 0501.209.080 and 2095.080.004 for alternative fitments. For precise compatibility, consult your equipment’s service manual or contact a ZF authorized distributor.
