Overview
The ZF 2095.110.018 P.T.O. SHAFT is a critical power take-off (PTO) component engineered for the WG100, WG130, and WG131 transmission series. This OEM genuine part transmits rotational energy from the transmission’s internal gearing to auxiliary hydraulic pumps or driven equipment. Positioned within the rear housing of the ZF powershift transmission, the shaft interfaces directly with the differential assembly and clutch packs to ensure seamless torque transfer. The SKU 2095.110.018 is precision-machined to OEM tolerances, guaranteeing a direct fit without modification. When replacing this shaft, it is common to inspect the adjacent 5838109007: DIFFERENTIAL and 0750117075: TAPER ROLLER BEARING for wear, as these components share the same load path.
Symptoms of Failure
When the ZF 2095.110.018 P.T.O. SHAFT begins to fail, operators may notice distinct performance issues. Common failure symptoms include:
- PTO engagement slipping under load: Worn splines on the shaft cause intermittent power loss to auxiliary equipment.
- Metallic grinding noise from transmission housing: Damaged bearing surfaces or shaft scoring produce audible friction during operation.
- Hydraulic pump output fluctuation: A failing shaft cannot maintain consistent rotational speed, leading to erratic hydraulic pressure.
- Oil seepage near the PTO mounting flange: Excessive shaft play degrades the seal surface, allowing transmission fluid to escape.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 2095.110.018 |
| OEM Reference | ZF 2095.110.018 |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Overall Length | 245 mm |
| Spline Diameter | 32 mm (10-tooth involute spline) |
| Weight | 1.85 kg |
| Hardness | HRC 58-62 (surface) |
| Surface Finish | Black oxide coating for corrosion resistance |
Compatibility
This P.T.O. SHAFT is designed exclusively for ZF powershift transmissions in the WG series. Verified compatible models include:
- ZF WG100 (all variants)
- ZF WG130 (all variants)
- ZF WG131 (all variants)
It is not recommended for use in WG180 or WG200 series transmissions without cross-referencing the shaft length and spline count. During installation, always replace the 2095209019: DIFFERENTIAL and 0631329086: SPRING PIN if they show signs of fretting or deformation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109007 | DIFFERENTIAL | Distributes torque between drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports radial and axial shaft loads |
| 2095209019 | DIFFERENTIAL | Secondary differential for PTO output |
| 0631329086 | SPRING PIN | Secures shaft to gear hub |
| 5838300817 | THRUST WASHER | Controls axial clearance in gear train |
| 5838300682 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Reduces friction on differential cross shaft |
| 5841302064 | THRUST WASHER | Positions PTO shaft end-play |
| 5838300137 | OUTER CLUTCH DISK | Transfers torque in clutch pack |
| 5838300138 | INNER CLUTCH DISK | Engages with outer disk for power flow |
ZF 2095.110.018 P.T.O. SHAFT – Shaft RFQ Support
PartsZF helps B2B buyers source ZF 2095.110.018 P.T.O. SHAFT with fast RFQ support, expert part-number lookup, documentation review, and export coordination. This shaft page is built from confirmed catalog, media, and reference data to reduce sourcing uncertainty for construction machinery transmission parts.
Part-Number Summary
Use ZF number 2095.110.018 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: P.T.O. SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.110.018 |
|---|---|
| Normalized SKU | 2095110018 |
| Part name | P.T.O. SHAFT |
| Product category | shaft |
| Cross-reference support | Available for RFQ review |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 4646.302.141 INPUT SHAFT
- ZF 4646.323.010 OUTPUT SHAFT
- ZF 4646.304.069 OUTPUT SHAFT
- ZF 4646.304.065 QUILL SHAFT
- ZF 4657.354.010 INPUT SHAFT
