Overview
The ZF 2095.301.010 OIL FEEDER is a critical OEM genuine component engineered for the lubrication system within ZF construction machinery transmissions. This precision-machined part directs pressurized hydraulic fluid to the rotating clutch packs and planetary gear sets, ensuring consistent oil flow for cooling and friction reduction. Positioned directly on the transmission main shaft, the SKU 2095.301.010 acts as a rotating union, transferring oil from the stationary housing to the spinning internal assemblies. Without this feeder, the transmission cannot maintain the necessary hydraulic pressure for gear engagement, making it essential for the longevity of adjacent components such as the 5838109007 DIFFERENTIAL and the 2095209019 DIFFERENTIAL.
Symptoms of Failure
When the ZF 2095.301.010 oil feeder wears out, operators will notice distinct performance degradation. Watch for these specific failure symptoms:
- Transmission overheating under load: A worn oil feeder reduces lubricant volume to the clutches, causing rapid heat buildup during digging or grading operations.
- Intermittent gear slipping or delayed engagement: Insufficient oil pressure from a degraded feeder leads to soft shifts and momentary power loss when moving from neutral to drive.
- External oil seepage near the shaft housing: Cracks or scoring on the feeder’s sealing surface allow hydraulic fluid to escape, leaving visible drips on the bell housing.
- Metallic debris in the transmission filter: As the feeder wears, microscopic particles from the hardened steel surface contaminate the oil, accelerating wear on the 0750117075 TAPER ROLLER BEARING and other rotating elements.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number (SKU) | 2095.301.010 |
| Material | Hardened alloy steel with nitrided surface |
| Overall Length | 82.5 mm (3.25 in) |
| Outer Diameter | 38.1 mm (1.50 in) |
| Inner Bore Diameter | 18.0 mm (0.71 in) |
| Weight | 0.24 kg (0.53 lbs) |
| OEM Reference | ZF 2095.301.010 |
Compatibility
This oil feeder is designed for ZF heavy-duty powershift transmissions commonly used in wheel loaders, graders, and telehandlers. Based on its design and oil flow characteristics, the 2095.301.010 is compatible with the following ZF transmission models: WG180, WG200, WG211, and 4WG200 series. It also integrates with the 0631329086 SPRING PIN used to secure the feeder in its bore. Always verify your transmission serial number before ordering, as variations exist between early and late production units.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 5838109007 | DIFFERENTIAL | Distributes torque to drive axles |
| 0750117075 | TAPER ROLLER BEARING | Supports rotating shaft loads |
| 2095209019 | DIFFERENTIAL | Rear axle torque distribution |
| 0631329086 | SPRING PIN | Secures oil feeder in housing |
| 5838300817 | THRUST WASHER | Controls axial clearance in gear sets |
| 5838300682 | DIFFERENTIAL AXLE | Transfers power to wheel hubs |
| 5838300811 | THRUST WASHER | Reduces friction in planetary carriers |
| 5841302064 | THRUST WASHER | Spacer for differential assembly |
| 5838300137 | OUTER CLUTCH DISK | Steel friction plate for clutch packs |
| 5838300138 | INNER CLUTCH DISK | Friction-lined plate for clutch engagement |
