ZF 2095.314.002 SLEEVE CARRIER | OEM Genuine Part

Overview

The ZF 2095.314.002 SLEEVE CARRIER is a precision-machined OEM genuine component that serves as the central hub for the differential assembly within ZF heavy-duty transmissions. This sleeve carrier supports the pinion gear set and provides the critical rotational interface between the input shaft and the axle output. Located inside the transmission housing, it ensures concentric alignment of the differential gears under extreme torque loads. The SKU 2095.314.002 is engineered to ZF’s exacting tolerances, making it a non-negotiable part for maintaining drivetrain integrity in construction machinery.

Symptoms of Failure

When the ZF 2095.314.002 SLEEVE CARRIER begins to wear, operators may notice these specific failure modes:

• Oil leaks around the transmission output flange – A worn carrier can distort the seal surface, causing hydraulic fluid to weep from the axle housing.
• Gear slipping or delayed engagement – Excessive clearance in the carrier allows the differential to shift axially, leading to intermittent power loss under load.
• Metallic grinding noise during turns – As the carrier’s bearing seat degrades, the 0750117075: TAPER ROLLER BEARING loses preload, producing a distinct growl in tight maneuvers.
• Vibration at low speeds – A cracked or fatigued sleeve carrier creates imbalance in the rotating assembly, felt as a shudder through the chassis.

Technical Specifications

Compatibility

This sleeve carrier is designed for ZF’s powershift transmission families commonly used in wheel loaders, dozers, and excavators. It is a direct fit for the following models:

• ZF WG180 series (WG180, WG181)
• ZF WG200 series (WG200, WG202)
• ZF 4WG-200 and 4WG-210 variants
• ZF Ergopower 3-speed and 4-speed units

When replacing the sleeve carrier, always inspect the mating 5838109007: DIFFERENTIAL and the 2095209019: DIFFERENTIAL for scoring. Secure the assembly using a new 0631329086: SPRING PIN to prevent fastener loosening.

Related Components