Overview
The ZF 2095.318.011 OUTPUT SHAFT is a critical torque-transfer component engineered for the WG100, WG130, and WG131 series transmissions. This OEM genuine part transmits rotational force from the planetary gear set to the differential assembly, ensuring smooth power delivery to the drive axles. The SKU 2095.318.011 is precision-machined to ZF’s exacting tolerances, serving as the final rotational link before torque enters the differential housing. When paired with a 2095109019 DIFFERENTIAL, this shaft maintains concentric alignment under heavy loads, reducing vibration and extending gear life.
Symptoms of Failure
- Transmission output flange oil seepage: Worn splines or bearing surfaces on the 2095.318.011 shaft can degrade the seal contact area, causing ATF fluid to leak past the output seal. This often appears as drips near the driveshaft connection.
- Intermittent gear slipping under load: As the output shaft’s splines wear, torque transfer to the 2095209037 DIFFERENTIAL becomes inconsistent, resulting in momentary power loss during acceleration or hill climbing.
- Audible clunking from the driveline: Excessive axial play in the shaft allows the 0750117075 TAPER ROLLER BEARING to shift, producing a metallic knock when shifting between drive and reverse.
- Vibration at highway speeds: A bent or fatigued output shaft creates harmonic oscillations that intensify above 45 mph, often misdiagnosed as wheel imbalance.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 2095.318.011 |
| Overall Length | 385 mm |
| Spline Diameter | 42 mm (24-tooth involute) |
| Bearing Journal Diameter | 55 mm |
| Material | Case-hardened 20MnCr5 alloy steel |
| Weight | 3.85 kg |
| OEM Reference | ZF 2095.318.011 (Genuine) |
| Surface Treatment | Black oxide + phosphate coating |
Compatibility
This output shaft is designed exclusively for ZF’s WG-series powershift transmissions. Verified compatible models include WG100, WG130, and WG131. It also fits select variants of the WG180 and WG200 when used with the correct 2095309059 DIFF.HOUSING. Always confirm your transmission’s serial number prefix (e.g., WG100-xxxxx) before ordering. The shaft interfaces directly with the 2095109019 DIFFERENTIAL and requires the 0750117075 TAPER ROLLER BEARING for proper support.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 2095109019 | DIFFERENTIAL | Distributes torque to axle shafts |
| 0750117075 | TAPER ROLLER BEARING | Supports output shaft radial/axial loads |
| 2095209037 | DIFFERENTIAL | Alternate differential assembly variant |
| 2095309059 | DIFF.HOUSING | Encloses differential gear set |
| 0631329086 | SPRING PIN | Secures shaft to differential carrier |
| 0730300820 | THRUST WASHER | Controls axial clearance in differential |
| 4482360002 | AXLE BEVEL GEAR | Transfers torque to wheel axles |
| 2095309081 | DIFFERENTIAL AXLE | Carries differential side gears |
| 5838300811 | THRUST WASHER | Reduces friction on bevel gear faces |
| 4482360001 | DIFFERENTIAL BEVEL GEAR | Primary gear within differential assembly |
ZF 2095.318.011 OUTPUT SHAFT – Shaft RFQ Support
For ZF 2095.318.011 OUTPUT SHAFT, send the part number, removed-part photos, and application context so PartsZF can prepare a focused sourcing response.
Part-Number Summary
Use ZF number 2095.318.011 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: TRAVEL POWER TAKE OFF SHAFT
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 2095.318.011 |
|---|---|
| Normalized SKU | 2095318011 |
| Part name | OUTPUT SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
