ZF 2095.346.073 OUTPUT SHAFT for WG100/WG130/WG131 | OEM Genuine Part

Overview

The ZF 2095.346.073 OUTPUT SHAFT is a critical torque-transmitting component located in the final drive assembly of ZF WG-series powershift transmissions. This OEM genuine part (SKU: 2095.346.073) transfers rotational force from the planetary gear set to the differential housing, directly influencing vehicle traction and load-holding capability. Precision-ground bearing journals and splined engagement surfaces ensure minimal backlash during high-torque operations in construction and agricultural machinery.

Symptoms of Failure

• Oil leaks near the transmission output flange: Worn seal surfaces on the 2095.346.073 shaft allow transmission fluid to escape, often mistaken for a simple gasket failure.
• Intermittent gear slipping under load: When the output shaft splines wear, the connection to the 5838109007: DIFFERENTIAL becomes loose, causing momentary power loss during uphill or loaded operation.
• Vibration or driveline shudder during acceleration: A bent or fatigued output shaft creates harmonic imbalance, particularly noticeable at 15–25 km/h in WG130-equipped loaders.
• Metallic debris in the transmission oil pan: Flaking from the hardened steel surface of the output shaft contaminates the hydraulic circuit, accelerating wear on the 0750117075: TAPER ROLLER BEARING.

Technical Specifications

Compatibility

This output shaft is engineered for the ZF WG100, WG130, and WG131 transmission series. It also fits select variants of the WG180 and WG200 when used with the 2095209019: DIFFERENTIAL assembly. Always verify the spline count and bearing journal dimensions against your existing shaft before ordering. The 2095.346.073 is not compatible with the older WG80 series without a 0631329086: SPRING PIN adapter kit.

Related Components