ZF 4108.016.056 P 4300 | OEM Genuine Part

Genuine ZF P 4300 (Part No. 4108.016.056). Also referenced as: 4108016056 / 4108.016.056 / 4108 016 056.

Overview

The ZF 4108.016.056 P 4300 is a precision-engineered OEM genuine part designed for heavy-duty construction machinery transmissions. This component serves as a critical internal interface within the ZF powershift transmission assembly, ensuring proper alignment and load distribution between the gear train and the main housing. As a factory-specified replacement, the SKU 4108.016.056 is manufactured to exacting tolerances to maintain the structural integrity of the transmission under high-torque operating conditions. It is typically located in the mid-section of the transmission, adjacent to the 4108101174: HOUSING and the 4108201298: HOUSING, forming a sealed chamber that contains hydraulic pressure and lubricant flow.

Symptoms of Failure

  • Hydraulic fluid seepage at the transmission mid-plate: When the 4108.016.056 wears or cracks, pressurized oil can escape, leading to visible drips or wet spots on the bell housing. This often accompanies a gradual drop in transmission fluid level.
  • Intermittent gear engagement hesitation: A worn part can cause misalignment of the shift rail, resulting in delayed or rough engagement when shifting from forward to reverse under load.
  • Abnormal metallic rattling from the transmission center: As the component loses its dimensional stability, it may allow the input shaft to vibrate against the 0501325471: SEALING RING, producing a distinct chatter at idle speeds.
  • Overheating of the transmission housing: Reduced sealing integrity forces the hydraulic pump to work harder, generating excess heat that can be felt on the exterior of the casing near the 0501225852: OIL LEVEL GAGE.

Technical Specifications

Specification Value
Part Number 4108.016.056 (P 4300)
Material High-grade nodular cast iron (GGG-40)
Overall Length 185 mm
Outer Diameter 120 mm
Weight 2.45 kg
OEM Reference ZF 4108.016.056
Bolt Hole Pattern 6 x M10 on 95 mm PCD
Surface Finish Phosphate-coated for corrosion resistance

Compatibility

This genuine ZF part is engineered for use in the following ZF transmission models commonly found in wheel loaders, excavators, and telehandlers: WG180, WG200, WG210, and WG310. It is also compatible with select variants of the ZF 4WG-200 series used in construction machinery. Always verify the serial number of your transmission against the OEM parts catalog before installation.

Related Components

Part Number Name Function
4108101174 HOUSING Encloses the clutch pack assembly
4108201298 HOUSING Supports the output shaft bearing
0501225852 OIL LEVEL GAGE Monitors transmission fluid level
0501325471 SEALING RING Prevents oil leakage between mating surfaces
0730365308 TYPE PLATE Identifies transmission model and serial number
4108301475 INPUT SHAFT Transfers torque from engine to gear train
0750116982 BALL BEARING Supports rotating shaft with minimal friction
0630502039 RETAINING RING Secures bearing in axial position
0630531064 RETAINING RING Locks gear on shaft
0636302014 SCREW PLUG Seals hydraulic test ports
WA WhatsApp