Overview
The ZF 4642.302.174 Input Shaft is a precision-machined component engineered specifically for the WG 150 series transmission. This OEM genuine part serves as the primary torque transfer interface between the engine flywheel and the transmission gear train. Located at the front of the transmission housing, the input shaft engages directly with the clutch assembly and routes rotational force through the planetary gear sets. The SKU 4642.302.174 is manufactured to ZF’s exacting tolerances, ensuring minimal runout and optimal load distribution during high-torque operations. When paired with a properly sealed TRANSMISSION HOUSING (4642101109) or a reinforced TRANSMISSION HOUSING (4642301205), this shaft maintains concentric alignment critical for long service life.
Symptoms of Failure
- Front seal oil leakage around the bell housing: Worn splines or bearing journal surfaces on the 4642.302.174 shaft allow the input seal to lose contact, causing transmission fluid to weep or stream from the front of the unit.
- Gear slipping under load in forward and reverse: When the input shaft’s spline teeth become stripped or fatigued, torque transfer becomes intermittent, leading to hesitation or complete loss of drive.
- Audible chattering or grinding during clutch engagement: A worn pilot bearing surface or bent shaft creates axial play, producing metallic noises that intensify as the transmission warms up.
- Vibration through the shift lever at highway speeds: Imbalance in the input shaft assembly, often from uneven wear, transmits harmonic vibrations into the cab or chassis.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | 4642.302.174 |
| OEM Reference | ZF 4642.302.174 |
| Overall Length | 385 mm (estimated) |
| Spline Diameter | 32 mm (estimated) |
| Material | Case-hardened alloy steel (20MnCr5 equivalent) |
| Weight | 4.2 kg (estimated) |
| Surface Treatment | Black oxide or phosphated |
Compatibility
This input shaft is primarily designed for the ZF WG 150 series, but it also fits select variants of the WG 180 and WG 200 transmissions when used with the correct bearing set. The 4642.302.174 is compatible with both standard and overdrive configurations of the WG150. For proper identification, always cross-reference the TYPE PLATE (0730365125) affixed to your transmission housing. Additionally, the shaft’s mounting flange requires the correct GROOVED STUD (0631311009) to secure the clutch assembly without fastener loosening.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4642101109 | TRANSMISSION HOUSING | Encloses and supports the input shaft and gear train |
| 4642301205 | TRANSMISSION HOUSING | Alternate housing casting for WG150 series |
| 0730365125 | TYPE PLATE | Identification plate with transmission model and serial number |
| 0631311009 | GROOVED STUD | Secures clutch assembly to input shaft flange |
| 4642301168 | SCREEN SHEET | Filter screen for transmission oil sump |
| 4642301169 | SCREEN SHEET | Fine-mesh filter screen for hydraulic circuit |
| 0636100621 | HEXAGON SCREW | Fastener for housing and valve body mounting |
| 4642301186 | SCREEN SHEET | Secondary filter screen for lubrication system |
| 4644159321 | SHIFT SYSTEM | Complete shift mechanism for gear selection |
| 4644306565 | VALVE HOUSING | Hydraulic control valve body assembly |
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
