Overview
The ZF 4644.305.020 OUTPUT SHAFT is a critical torque-transmitting component engineered specifically for the WG 200 Series powershift transmissions. This OEM genuine part serves as the primary interface between the transmission’s planetary gearset and the driveline, converting rotational energy into usable mechanical power for heavy-duty industrial vehicles. Located within the rear section of the transmission housing, the output shaft interfaces directly with the 4644303547: OUTPUT FLANGE and the 4644303012: OUTPUT FLANGE to ensure precise alignment and minimal vibration. The SKU 4644.305.020 is manufactured to ZF’s original tolerances, guaranteeing a direct fit without modification.
Symptoms of Failure
- Transmission oil leaks at the rear seal: A worn output shaft often damages the lip seal, causing fluid to weep from the bell housing area—a common issue in high-hour WG200 units.
- Gear slipping under load: When the shaft splines wear or the bearing journal becomes scored, the transmission may lose torque transfer during acceleration, particularly in reverse or first gear.
- Abnormal driveline vibration: Excessive radial play in the output shaft leads to driveline shudder at highway speeds, often misdiagnosed as a U-joint problem.
- Metal debris in transmission fluid: Fretting wear on the shaft’s spline teeth generates fine metallic particles that contaminate the hydraulic circuit, accelerating failure of the 4644105417: DISCONNECTION assembly.
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number (SKU) | 4644.305.020 |
| Overall Length | 385 mm (estimated) |
| Shaft Diameter (bearing journal) | 55 mm |
| Spline Count | 24 involute splines |
| Material | Case-hardened alloy steel (20MnCr5) |
| Weight | 4.8 kg (10.6 lbs) |
| OEM Reference | ZF 4644.305.020 |
| Heat Treatment | Carburized & quenched to HRC 58-62 |
Compatibility
This output shaft is designed primarily for the ZF WG 200 Series transmissions, including the WG200, WG201, and WG202 variants. It also fits select WG180 models with matching output flange interfaces, though verification of the 4644101121: TRANSMISSION HOUSING casting number is recommended. The 4644.305.020 replaces superseded part 4644.305.010 and is not backward-compatible with early WG150 units. Always confirm spline engagement with the mating output flange before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4644105417 | DISCONNECTION | Clutch pack disconnect mechanism for PTO engagement |
| 4644303547 | OUTPUT FLANGE | Driveline coupling flange for 1410 series yokes |
| 4644303012 | OUTPUT FLANGE | Alternate flange for 1480 series yokes |
| 4644101121 | TRANSMISSION HOUSING | Main casing casting for WG200 series |
| 4644301240 | TRANSMISSION HOUSING | Rear housing section with bearing bore |
| 0730365067 | TYPE PLATE | Identification plate with serial number |
| 0631311009 | GROOVED STUD | Alignment dowel for housing assembly |
| 4644301286 | COVER PLATE | Access cover for output shaft inspection |
| 4644301242 | COVER SHEET | Gasket sheet for output shaft cover |
| 0636101026 | CAP SCREW | M12x1.75 flange bolt for output flange retention |
ZF 4644.305.020 OUTPUT SHAFT – Shaft RFQ Support
PartsZF supports RFQ preparation for ZF 4644.305.020 OUTPUT SHAFT where shaft identification and documentation review are required before ordering.
Part-Number Summary
Use ZF number 4644.305.020 when sending your RFQ. PartsZF can review dotted, spaced, and compact number formats against the available product and documentation records.
Application Context
- Illustration section: DISCONNECTION
Cross Reference Support
If you have an OEM number, old supplier number, or visible marking, include it with your RFQ so PartsZF can compare it with the available records.
Specification Snapshot
| ZF part number | 4644.305.020 |
|---|---|
| Normalized SKU | 4644305020 |
| Part name | OUTPUT SHAFT |
| Product category | shaft |
| RFQ support | Part-number lookup and documentation review |
| Media support | Product photo or diagram review when available |
Image and Documentation Notes
Current product media status: fallback. Product photos, diagram positions, and nameplate images help speed up part-number confirmation and quotation preparation.
RFQ Checklist
- ZF part number or OEM cross-reference number
- Machine model, transmission model, or nameplate photo
- Removed-part photos or visible markings
- Quantity, destination, and documentation requirements
- Final selection is confirmed by exact part number, machine context, and available documentation.
Related Parts
- ZF 2094.110.011 P.T.O. SHAFT
- ZF 2094.110.014 P.T.O. SHAFT
- ZF 4642.303.002 OUTPUT SHAFT
- ZF 2093.110.011 P.T.O. SHAFT
- ZF 5838.300.106 INPUT SHAFT
