Overview
The ZF 4646.121.106 OIL PIPE is a precision-engineered fluid delivery channel designed for the WG 250, WG 260, and WG 310 series transmissions. This OEM sub-assembly component routes pressurized hydraulic oil from the valve body to the clutch packs and lubrication circuits within the transmission housing. Without this critical conduit, the transmission cannot maintain proper clutch engagement or bearing cooling. The SKU 4646.121.106 is a direct replacement for the original factory part, ensuring exact fitment and flow characteristics. It is typically installed alongside the 4646101179: TRANSMISSION HOUSING and the 4646301345: HOUSING to complete the internal oil circuit assembly.
Symptoms of Failure
When the ZF 4646.121.106 oil pipe deteriorates or becomes clogged, operators will notice specific performance issues. Watch for these failure indicators:
- Hydraulic oil leaks at the transmission housing seam – A cracked or corroded pipe often weeps fluid where it connects to the TRANSMISSION HOUSING, leaving puddles under the vehicle.
- Delayed or harsh gear engagement – Insufficient oil flow to the clutch packs causes hesitation when shifting from neutral to drive or reverse.
- Transmission overheating – A restricted oil pipe reduces lubrication flow to bearings and gears, leading to elevated operating temperatures.
- Intermittent gear slipping under load – When the pipe fails to deliver consistent pressure, the transmission may momentarily lose torque transfer during uphill climbs or heavy hauling.
Technical Specifications
| Parameter | Specification |
|---|---|
| Part Number | 4646.121.106 |
| Material | Seamless steel tube with zinc-nickel plating |
| Length | 285 mm (estimated) |
| Outer Diameter | 12 mm |
| Wall Thickness | 1.5 mm |
| Weight | 0.18 kg |
| OEM Reference | ZF 4646.121.106 |
| Sealing Method | Compression fit with O-ring (use 0634316523: O-RING) |
Compatibility
This oil pipe is engineered for the ZF WG series powershift transmissions. It is a direct fit for the following models:
- WG 250 Series
- WG 260 Series (primary category)
- WG 310 Series
It is also compatible with earlier WG 180 and WG 200 variants when used with the appropriate 0899317830: ADAPTER. For proper installation, secure the pipe using 0636115293: 螺栓 and ensure the 4646201003: POT is clean and free of debris.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4646101179 | TRANSMISSION HOUSING | Main structural casing that encloses all internal components |
| 4646301345 | HOUSING | Secondary housing for valve body and oil passages |
| 0636115293 | 螺栓 | Fastener for securing oil pipe brackets |
| 4646201003 | POT | Oil collection reservoir for sump return |
| 0736300232 | 螺栓 | Mounting bolt for transmission cover |
| 4475280208 | SCREW PLUG | Seals oil test ports and drain holes |
| 0634316523 | O-RING | Provides leak-proof seal at pipe connections |
| 4646108013 | COUNTERSHAFT | Transfers torque between gear sets |
| 4646138401 | FILTER | Removes contaminants from hydraulic oil |
| 0899317830 | ADAPTER | Converts pipe fitting sizes for cross-model use |
Authorized ZF Distributor
We are a certified supplier of genuine ZF components.
