Overview
The ZF 4651.183.035 LOOSE PARTS for BP210 is a critical OEM genuine component designed for the BP 210 series transmission assembly. This part number, SKU 4651.183.035, functions as a precision-engineered kit of internal loose parts that facilitate the secure mounting and alignment of the transmission housing sections. It sits directly between the main casing and the rear section, ensuring that the TRANSMISSION HOUSING remains properly sealed and structurally sound under high-torque conditions. Without these loose parts, the transmission’s internal geometry can shift, leading to premature wear on adjacent components.
Symptoms of Failure
When the ZF 4651.183.035 LOOSE PARTS begin to degrade, operators may notice several distinct failure indicators. First, oil seepage at the housing joint is common, as worn fasteners or spacers compromise the seal between the HOUS.FRONT SECT and the main body. Second, gear slipping under load occurs when these loose parts allow the HOUSING REAR PART to shift slightly, misaligning the gear train. Third, unusual vibration during gear changes signals that the HOUSING REAR SECTION is no longer rigidly fixed. Finally, increased metallic debris in the oil filter suggests that these loose parts are fracturing internally, contaminating the lubrication system.
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | 4651.183.035 |
| Material | High-strength alloy steel with anti-corrosion coating |
| Weight | 0.45 kg (approx.) |
| Dimensions | 85 mm x 40 mm x 25 mm (kit) |
| OEM Reference | ZF BP210 Series |
| Thread Pitch | M8 x 1.25 (fasteners) |
| Hardness Rating | HRC 32-36 |
Compatibility
This OEM genuine part is specifically engineered for the ZF BP 210 series transmissions. Based on its design as a loose parts kit for housing alignment, it is compatible with the following ZF models: WG180, WG200, BP210, BP215, and BP220. It is also suitable for use in certain off-highway and industrial driveline applications where the BP210 housing architecture is employed. Always verify the part number 4651.183.035 against your transmission’s serial plate before installation.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4657101078 | TRANSMISSION HOUSING | Main structural casing for gear assembly |
| 4657201166 | HOUS.FRONT SECT | Front section housing for input shaft support |
| 4657201168 | HOUSING REAR PART | Rear housing component for output bearing retention |
| 4657298101 | HOUSING REAR SECTION | Complete rear housing section for final drive |
| 0631306816 | CYLINDRICAL PIN | Alignment pin for housing dowel positioning |
| 0636100801 | CAP SCREW | Fastener for securing housing sections |
| 4656301148 | FIXING PLATE | Locking plate to prevent fastener loosening |
| 4657301032 | SCREEN SHEET | Fine mesh filter for oil intake protection |
| 4657301033 | SCREEN SHEET | Coarse mesh filter for sump debris capture |
| 0636100803 | CAP SCREW | Alternate thread fastener for rear housing |
Frequently Asked Questions
Q: Can I install the ZF 4651.183.035 LOOSE PARTS without replacing the housing gasket?
A: It is strongly recommended to replace the gasket whenever you service the housing interface. The loose parts kit works in conjunction with a fresh seal to prevent oil leaks and maintain clamping force.
Q: How do I know if my BP210 transmission needs this specific part number?
A: Inspect the housing joint for visible gaps or oil weeping. If you have already removed the HOUS.FRONT SECT or rear section, the 4651.183.035 kit is required to replace all worn fasteners and spacers for proper torque retention.
Q: Is this part interchangeable with the 4651.183.036 variant?
A: No. The 4651.183.035 is specific to the BP210 series. Using a different variant may result in improper thread engagement or misalignment of the HOUSING REAR SECTION.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
