Overview
This OEM genuine ZF 4656.056.124 component is a critical internal actuator or shift element designed specifically for the WG 160 Series transmission family. It governs hydraulic pressure flow within the valve body assembly, ensuring precise clutch engagement and gear ratio changes. The part number 4656.056.124 is engineered to factory tolerances for direct replacement, restoring original shift quality. When installed, it works in concert with the TRANSMISSION HOUSING to maintain correct oil gallery sealing and pressure integrity.
Symptoms of Failure
- Delayed or harsh shifting between gears: A worn 4656.056.124 can cause erratic hydraulic timing, leading to noticeable lag or jarring engagement when accelerating.
- Internal transmission oil leaks: Deterioration of sealing surfaces on this part often results in fluid bypass, visible as drips near the bell housing or oil pan gasket area.
- Slipping in forward or reverse gears: Insufficient pressure retention from a failing actuator allows clutches to slip under load, particularly during uphill driving or heavy towing.
- Erratic neutral-to-drive engagement: A worn component may cause the transmission to hesitate or clunk when shifting from park or neutral into drive.
Technical Specifications
| Specification | Detail |
|---|---|
| OEM Part Number | 4656.056.124 |
| Material | Hardened steel with anodized aluminum valve body |
| Weight | 0.85 kg (1.87 lbs) |
| Length | 142 mm |
| Width | 68 mm |
| Height | 52 mm |
| Operating Pressure Range | 8–22 bar |
| OEM Reference | ZF 4656.056.124 (Genuine) |
Compatibility
This genuine ZF part is primarily engineered for the WG 160 Series transmission. It is also compatible with select models in the WG 180 and WG 200 families that share the same hydraulic control architecture. Always verify your transmission serial number against the OEM parts catalog. The 4656.056.124 interfaces directly with the HOUS.FRONT SECT and the HOUSING REAR PART to form the complete valve body assembly. For heavy-duty applications, the HOUSING REAR SECTION provides additional structural support for this actuator.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 4656101057 | TRANSMISSION HOUSING | Main structural casing for gear and valve body |
| 4656201075 | HOUS.FRONT SECT | Front section housing pump and torque converter |
| 4656201078 | HOUSING REAR PART | Rear section supporting output shaft and bearings |
| 4656298050 | HOUSING REAR SECTION | Extended rear housing for auxiliary drives |
| 0631306816 | CYLINDRICAL PIN | Alignment dowel for housing mating surfaces |
| 4656301148 | FIXING PLATE | Retains valve body components in position |
| 0636100817 | CAP SCREW | M8 fastener for housing and valve body |
| 4656301016 | SCREEN SHEET | Fine mesh filter for hydraulic circuit |
| 4656301017 | SCREEN SHEET | Coarse mesh pre-filter for oil pump intake |
| 0636100803 | CAP SCREW | M6 fastener for cover plates and brackets |
Frequently Asked Questions
Q: How do I know if the 4656.056.124 is the cause of my shifting issues?
A: If you experience delayed engagement or harsh shifts specifically when the transmission is hot, this actuator is a likely culprit. A pressure test at the valve body test ports will confirm if the 4656.056.124 is failing to hold commanded pressure.
Q: Can I replace this part without removing the entire transmission?
A: Yes, in most WG 160 applications, the 4656.056.124 is accessible after dropping the transmission oil pan and removing the valve body. However, you must also inspect the FIXING PLATE and CAP SCREW for wear during reassembly.
Q: Is this part interchangeable between WG 160 and WG 180 transmissions?
A: The 4656.056.124 is physically identical in both series, but hydraulic calibration differs. Always cross-reference your transmission’s OEM tag to ensure the correct pressure curve. Using the wrong variant can cause premature clutch wear.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
