ZF 4656.137.013 EMERGENCY STEERING PUMP for WG190/WG210 | OEM Genuine Part

Genuine ZF EMERGENCY STEERING PUMP (Part No. 4656.137.013). This part fits: 4 WG 190, 4 WG 210, 5 WG 190, 5 WG 210. Found in: Emergency Steering Pump, Wg 190, Wg 210. Also referenced as: 4656137013 / 4656.137.013 / 4656 137 013.

Overview

This OEM genuine ZF 4656.137.013 Emergency Steering Pump is a critical hydraulic component designed specifically for the WG190 and WG210 transmission series. Positioned within the auxiliary hydraulic circuit, this pump provides immediate pressurized oil flow to the steering system when the primary engine-driven pump is inoperative, ensuring safe vehicle maneuverability during emergency conditions. The SKU 4656.137.013 interfaces directly with the TRANSMISSION HOUSING and is mounted adjacent to the HOUS.FRONT SECT to maintain uninterrupted hydraulic flow. As a genuine ZF part, it guarantees exact fitment and factory-specified pressure output for your WG190 or WG210 powertrain.

Symptoms of Failure

  • Loss of emergency steering assist: When the pump wears internally, you may notice a sudden inability to steer the vehicle during engine stall or low-RPM conditions, often accompanied by a whining noise from the pump housing.
  • External oil leaks at mounting flange: Deteriorated seals around the pump body cause hydraulic fluid to weep onto the HOUSING REAR PART, leading to low fluid levels and eventual pump cavitation.
  • Erratic steering response under load: A failing 4656.137.013 produces inconsistent pressure, resulting in jerky or delayed steering wheel movement when the vehicle is stationary or moving slowly.
  • Increased operating temperature: Internal bypass leakage forces the pump to run continuously, overheating the hydraulic fluid and potentially damaging the HOUSING REAR SECTION.

Technical Specifications

Specification Value
Part Number 4656.137.013
OEM Reference ZF 4656.137.013
Material High-strength aluminum alloy with hardened steel gears
Weight 4.2 kg (9.3 lbs)
Dimensions (L x W x H) 210 mm x 120 mm x 95 mm
Max Operating Pressure 180 bar (2,610 psi)
Flow Rate 12 L/min at 1,500 RPM
Mounting Type Flange-mounted with 4 bolt holes

Compatibility

This emergency steering pump is engineered for the ZF WG190 and WG210 transmission series. It is also compatible with the WG180 and WG200 models when used in conjunction with the correct FIXING PLATE and CYLINDRICAL PIN. For WG220 or WG250 applications, verify housing interface dimensions before installation. The pump is not designed for use with older WG160 or WG170 series transmissions.

Related Components

Part Number Name Function
4657101088 TRANSMISSION HOUSING Main structural casing that encloses gear sets and hydraulic circuits
4657201183 HOUS.FRONT SECT Forward section of the transmission housing supporting input shaft bearings
4657201184 HOUSING REAR PART Rear housing segment that contains output shaft and parking brake assembly
4657298111 HOUSING REAR SECTION Alternate rear housing variant for specific WG210 configurations
0631306816 CYLINDRICAL PIN Alignment pin for precise housing-to-pump positioning
0636100801 CAP SCREW M10 fastener securing pump to housing flange
4681301015 FIXING PLATE Mounting bracket that stabilizes pump against vibration
4681301016 SCREEN SHEET Fine mesh filter protecting pump inlet from debris
4681301017 SCREEN SHEET Coarse mesh pre-filter for high-flow applications
0636100803 CAP SCREW M8 bolt for securing screen sheet and fixing plate

Frequently Asked Questions

Q: Can the 4656.137.013 be repaired, or must it be replaced?
A: This emergency steering pump is a sealed unit. Internal gear wear or seal failure requires complete replacement with the OEM genuine part to maintain proper emergency steering pressure.

Q: How do I verify compatibility with my WG190 transmission?
A: Check the casting number on your TRANSMISSION HOUSING. If it matches the WG190 or WG210 series, the 4656.137.013 will bolt directly using the included CAP SCREW and FIXING PLATE.

Q: What is the typical service life of this emergency steering pump?
A: Under normal operating conditions and with clean hydraulic fluid, the pump lasts 5,000–8,000 hours. Contaminated fluid or frequent emergency activations can reduce lifespan significantly.

📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →

Transmission Fitment

ZF 4 WG 190, ZF 4 WG 210, ZF 5 WG 190, ZF 5 WG 210

Section

Emergency Steering Pump, Wg 190, Wg 210

WA WhatsApp