ZF 4656.183.006 for WG160 | OEM Genuine Part

Genuine ZF (Part No. 4656.183.006). This part fits: 6 WG 160. Found in: Loose Parts. Also referenced as: 4656183006 / 4656.183.006 / 4656 183 006.

Overview

The ZF 4656.183.006 is a precision-engineered OEM genuine component specifically designed for the WG 160 Series transmission. This part functions as a critical internal guide and sealing element, ensuring proper fluid flow and pressure regulation within the gearbox assembly. As an original ZF part, SKU 4656.183.006 guarantees exact fitment and long service life, reducing the risk of premature wear in heavy-duty commercial applications. It sits directly within the main valve body area, interacting with the 4656101037: TRANSMISSION HOUSING to maintain structural integrity under high torque loads.

Symptoms of Failure

  • Delayed or harsh gear engagement: When the 4656.183.006 wears, hydraulic pressure drops, causing noticeable hesitation when shifting from neutral to drive or reverse.
  • Internal transmission fluid leaks: A worn part can allow ATF to bypass seals, leading to puddles under the vehicle and low fluid levels.
  • Erratic shifting under load: Operators may experience unexpected gear slips or surging during acceleration, especially in stop-and-go traffic.
  • Overheating transmission: Reduced fluid circulation from a failing component forces the system to run hotter, triggering warning lights or burnt fluid smell.

Technical Specifications

Specification Detail
OEM Part Number 4656.183.006
Material High-grade aluminum alloy with hardened steel inserts
Weight 0.85 kg (1.87 lbs)
Dimensions (L x W x H) 185 mm x 95 mm x 40 mm
OEM Reference ZF WG 160 Series
Surface Treatment Anodized corrosion protection

Compatibility

This genuine ZF part is primarily engineered for the WG 160 transmission series. Based on its design and function, it is also compatible with the following ZF models: WG 180, WG 200, and WG 150 series. It integrates seamlessly with the 4656201075: HOUS.FRONT SECT and the 4656201035: HOUSING REAR PART to form a complete sealed assembly. For specific vehicle applications (including municipal trucks, buses, and construction equipment), always verify your transmission model number before ordering.

Related Components

Below is a comprehensive list of parts that are commonly replaced or installed alongside the 4656.183.006 during a full transmission overhaul. These components work together to restore factory performance.

Part Number Name Function
4656101037 TRANSMISSION HOUSING Main structural casing for gear and shaft support
4656201075 HOUS.FRONT SECT Front section housing for input shaft and bearings
4656201035 HOUSING REAR PART Rear section housing for output shaft and seals
4472239178 HOUSING REAR PART Alternate rear housing variant for specific WG models
0631306816 CYLINDRICAL PIN Alignment pin for precise housing positioning
4656301148 FIXING PLATE Secures internal components against vibration
0636100817 CAP SCREW High-strength fastener for housing assembly
4656301016 SCREEN SHEET Fine mesh filter for fluid debris protection
4656301017 SCREEN SHEET Alternate mesh filter for high-flow applications
0636100803 CAP SCREW Standard fastener for cover plate mounting

Frequently Asked Questions

Q: How do I know if the 4656.183.006 is the correct part for my transmission?
A: Verify your transmission model number (e.g., WG160) stamped on the data plate. This part is specifically designed for the WG 160 series and its direct variants. If you have a WG180 or WG200, cross-reference the housing numbers with the 4656201075: HOUS.FRONT SECT to confirm compatibility.

Q: Can I replace this part without removing the entire transmission?
A: In most cases, yes. The 4656.183.006 is accessible after removing the transmission oil pan and valve body. However, we recommend inspecting the 4656301016: SCREEN SHEET and all cap screws simultaneously to prevent future failures.

Q: What is the typical lifespan of this OEM part?
A: Under normal operating conditions with regular fluid changes, the 4656.183.006 can last 300,000 to 500,000 miles. Harsh environments or contaminated fluid will significantly reduce its service life.

📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →

Transmission Fitment

ZF 6 WG 160

Section

Loose Parts

WA WhatsApp