Overview
The ZF 4657.130.127 is a precision-engineered OEM genuine component designed for the WG190 and WG210 series transmissions. This part functions as a critical sealing and alignment element within the hydraulic control assembly, ensuring proper fluid routing and pressure integrity during gear shifts. The SKU 4657.130.127 is manufactured to ZF’s exacting tolerances, making it essential for maintaining the durability and shift quality of heavy-duty commercial transmissions. When installed, it works in concert with adjacent hardware such as the 0636115293: 螺栓 and the 0634313603: O-RING to create a leak-free, vibration-resistant joint.
Symptoms of Failure
- Hydraulic fluid seepage around the valve body: A worn 4657.130.127 often causes slow oil leaks that appear as drips or wet spots near the transmission pan gasket area, leading to low fluid levels and eventual overheating.
- Erratic or delayed gear engagement: When this part loses its sealing capability, internal pressure drops, resulting in hesitation when shifting from neutral to drive or reverse, especially under load.
- Audible whining or buzzing from the transmission: A degraded seal can allow air ingestion into the hydraulic circuit, producing a high-pitched noise during acceleration that worsens over time.
- Intermittent slipping in higher gears: As the component fatigues, the WG190/WG210 may exhibit random slipping in 4th or 5th gear, often misdiagnosed as a clutch pack issue.
Technical Specifications
| Specification | Detail |
|---|---|
| Part Number (SKU) | 4657.130.127 |
| Material | High-grade nitrile rubber with steel insert |
| Outer Diameter | 38.5 mm |
| Inner Diameter | 22.0 mm |
| Thickness | 6.2 mm |
| Weight | 0.045 kg |
| OEM Reference | ZF 4657.130.127 (Genuine) |
| Operating Temperature Range | -40°C to +120°C |
Compatibility
This genuine ZF part is specifically engineered for the WG190 and WG210 transmission series. It is also compatible with the closely related WG180 and WG200 models, as well as certain variants of the WG150 series used in mid-range commercial vehicles. The 4657.130.127 is a direct replacement for the original factory component and should be paired with the 0631306816: CYLINDRICAL PIN and the 0636100801: CAP SCREW to ensure correct alignment and clamping force during reassembly.
Related Components
| Part Number | Name | Function |
|---|---|---|
| 0636115293 | 螺栓 | Secures valve body cover plate |
| 0634313603 | O-RING | Provides static seal between housing sections |
| 0631306816 | CYLINDRICAL PIN | Aligns valve body to transmission case |
| 0636100801 | CAP SCREW | Fastens oil filter housing assembly |
| 4681301015 | FIXING PLATE | Retains screen sheets in oil sump |
| 4681301016 | SCREEN SHEET | Primary filtration for hydraulic fluid |
| 4681301017 | SCREEN SHEET | Secondary fine-mesh filtration layer |
| 0636100803 | CAP SCREW | Mounts oil cooler adapter block |
| 0750100162 | OIL FEED.HOUSG. | Routes pressurized oil to clutch packs |
| 4656301023 | GASKET | Seals oil pan to transmission housing |
Frequently Asked Questions
Q: Can I reuse the 4657.130.127 if it looks clean?
A: No. This is a single-use sealing component. Even if it appears undamaged, the nitrile material loses elasticity after thermal cycling. Always replace it with a new OEM part to prevent future leaks.
Q: Is the 4657.130.127 the same for WG190 and WG210?
A: Yes. ZF uses the identical part number for both series. However, always verify your transmission serial number, as early WG190 units may require a different variant.
Q: What torque should I use when installing the related cap screws?
A: For the 0636100801: CAP SCREW, ZF specifies 22 Nm. Over-tightening can distort the seal and cause immediate failure.
📞 Need this part? Contact our ZF specialists:
Email: info@partszf.com |
Phone: +86 158 2286 3467 |
Request a Quote →
